FixApplianceCode logo — appliance error code lookup and repair guidesFixApplianceCode

Amana Washer F7E1 error code

On Amana washers, error F7E1 indicates: Shifter motor fault. Start with a 5-minute power reset at the breaker, then follow the washer-specific checks below before ordering replacement parts for F7E1. If the code returns on two consecutive cycles after a reset, treat it as a confirmed fault — not a one-time power glitch.

Reviewed August 2025 · sources below

Safe to keep using?

Use caution

This issue may worsen during use — limit operation and address promptly.

5 product recalls may apply

Brand-level matches — verify your model.

Show
  • Whirlpool Recalls Stacked Commercial Clothes Dryers Sold Under the ADC Brand Due to Fire Hazard (Recall Alert)

    Sep 2023 · Confirm your model

    Notice
  • CPSC, Whirlpool Corporation Announce Recall of Dishwashers

    Feb 2005 · Confirm your model

    Notice
  • CPSC, Whirlpool Announce Recall of Washer and Gas Dryer Units

    Jul 2002 · Confirm your model

    Notice
  • Gas Ranges Recalled by Amana

    Aug 1999 · Confirm your model

    Notice
  • Dishwasher Recalled by Whirlpool

    May 1996 · Confirm your model

    Notice

Next step

Still seeing F7E1?

Show a photo or describe the symptom. Answer a few safety-first questions and see whether a part is needed.

Diagnose my appliance

Free guided checks · No account required · Don’t open live electrical, gas, or refrigerant equipment

How to fix F7E1

  1. Unplug the washer or turn off power at the breaker before inspecting any components.
  2. Reset Amana F7E1: leave power off for 5 minutes, restore power, then restart. Confirm whether F7E1 returns.
  3. Check the most common cause for F7E1: Shifter motor fault.
  4. Inspect hoses, connections, and visible wiring for damage, clogs, or loose fittings.
  5. If a reset and basic checks don't clear the code, the fix often requires a replacement part (see recommended parts below).
  6. Reassemble, restore power, and run a test cycle. If F7E1 returns, the faulty component likely needs replacement.

Call a pro when: Call a technician if you smell burning, see sparking, hear grinding from the motor, or the code returns after replacing the suspected part.

What F7E1 means

Shifter motor fault.

Buy the replacement part

Washer Shift Actuator

MPN: W10913953

Check current price on Amazon

Amazon link · paid affiliate link. Confirm fit and listing before ordering.

DIY Difficulty
5 /10MODERATE

DIY difficulty: 5/10 — this repair usually requires appliance disassembly, electrical testing.

Time: 30–60 minutes
Risk: Moderate
Skill: Intermediate
Tools: Screwdriver, Adjustable pliers, Multimeter, Flashlight, Work gloves, Socket set
Power disconnect requiredDisassembly required

Likely causes

Most likelyUser-serviceable issue

Many codes resolve with cleaning, resetting, or reconnecting.

Check: Power-cycle the appliance and check for obvious blockages or loose connections.

Est. cost: $0–$0

PossibleFailed component

Wear or electrical failure of an internal part.

Check: If basic checks fail, the faulty component likely needs replacement.

Est. cost: $0–$75

Repair or Replace?

DIY repair

$26–$49

Professional repair

$191–$259

Comparable replacement

$659–$891

Our recommendation

REPAIR LIKELY MAKES SENSE

REPAIR LIKELY MAKES SENSE. Professional repair ($191–$259) is well below replacement cost.

Actual repair and replacement costs vary by model, location, labor rate, and condition.

Guided repair checklist

Complete the safe checks one at a time. Progress is saved for this browser so you can continue later.

0 of 6 checks recorded

Recommended next action

Start with this check before considering replacement parts.

Check 1 of 6

Unplug the washer or turn off power at the breaker before inspecting any components.

Did the repair resolve the issue?

Restoring repair progress…

Questions about F7E1

What does F7E1 error code mean on a Amana washer?

Shifter motor fault.

How do I reset Amana washer F7E1?

Unplug the washer or switch it off at the breaker for 5 minutes, then restore power and restart. A reset clears a stored F7E1 after a glitch, but the code will return if the underlying fault is still present.

What part do I need for Amana F7E1?

Often yes — error F7E1 frequently points to a failed component. Check the recommended parts below for direct replacements.

Can I fix Amana error F7E1 myself?

Many F7E1 errors can be fixed DIY if you're comfortable with basic tools. Start with the reset and steps above. If the issue involves electrical components or the code returns after replacing parts, call a professional.

Amana F7E1 on specific models

Other Amana Washer codes

Prevent this problem next time

  • Follow manufacturer maintenance schedule
  • Address small issues before they worsen

Sources

Manufacturer meaning

Shifter motor fault.

FixApplianceCode guidance

Start with basic checks for Amana F7E1 before ordering parts.

Source type: Part database

Source: ModelPartFinder + FixApplianceCode editorial

Last reviewed: 2026-11-07

Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer

As an Amazon Associate I earn from qualifying purchases. Some links may also earn other retailer commissions, at no additional cost to you. Affiliate disclosure

Get AI-powered fix steps for Amana F7E1 →

As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure