Whirlpool error codes
Browse all known Whirlpool error codes. Pick your appliance, or click any code for fix steps and parts.
Top Whirlpool error codes
Most searched codes with full fix guides and compatible parts.
Washer13 codesDryer7 codesDishwasher5 codesRefrigerator5 codesOven / Range7 codesMicrowave2 codesCooktop1 code
Washer error codes
- F01Main control board communication error.
- F02Keypad or user interface failure.
- F03Pressure switch or water level issue.
- F05Door lock mechanism failure.
- F06Motor control fault.
- F07Motor unable to reach target speed.
- F08Water valve stuck open.
- F09Overflow condition detected.
- F20No water detected entering washer.
- F21Long drain — water not draining in time.
- F28Communication error between boards.
- F33Pump drive system fault.
- F60Drive motor speed sensing fault — the washer cannot confirm drum speed.
Dryer error codes
- AFRestricted airflow — the lint screen or vent is clogged, crushed, kinked, or has too many turns.
- L2Low or no line voltage — the heater cannot turn on. Electric dryers need both sides of a 240V breaker.
- PFPower failure — the drying cycle was interrupted. Hold Start to resume.
- F23Exhaust thermistor shorted — the dryer cannot read exhaust temperature safely.
- F4E3Restricted airflow (same family as AF) — the vent or lint screen is blocking exhaust.
- F22Exhaust thermistor open.
- F24Moisture sensor fault.
Dishwasher error codes
- F6E1User interface or main control error — power-cycle before replacing a board.
- F7E2Wash motor error — the circulation pump is not running.
- F9E1Long drain — the dishwasher is not emptying. Clean the filter and check the drain hose, disposer knockout, and air gap.
- F8E4Water detected in the drip tray — empty the tray and check for leaks.
- H20Not detecting water — confirm the supply valve is open and the inlet hose is not kinked.
Refrigerator error codes
- F3E1Refrigerator temperature or sensor fault — power-cycle, then confirm cooling is on.
- F3E2Freezer temperature sensor fault — the freezer thermistor reading is out of range.
- F5E1Defrost system fault — frost can build up and block airflow until the heater or bi-metal is checked.
- F7E1Evaporator fan fault — the freezer fan is iced, jammed, or not running.
- F8ECIce or water system fault — the ice maker or water valve circuit did not complete.
Oven / Range error codes
- F9E0Range wiring or voltage error — recent installs often have a miswired outlet.
- F1E0Oven control or wiring fault — reset the breaker for one minute.
- F2E1Keypad or user-interface connection fault.
- F3E1Oven temperature sensor fault (often shown as F3 E1).
- LOCControl lock is on — oven keys are locked.
- SABSabbath mode is on — cancel Sabbath to restore normal controls.
- PFPower failure (often shown as PF) — press Cancel and reset the clock.