KitchenAid error codes
Browse all known KitchenAid error codes. Pick your appliance, or click any code for fix steps and parts.
Washer2 codesDishwasher6 codesDryer4 codesRefrigerator5 codesOven / Range5 codesMicrowave2 codesCooktop1 code
Washer error codes
Dishwasher error codes
- F9E1Long drain — the dishwasher is not emptying. Clean the filter and check the drain hose, disposer knockout, and air gap.
- 6-4Wash motor electrical problem — the wash pump motor is not running or communicating.
- F6E1User interface or main control error — power-cycle before replacing a board.
- F7E2Wash motor error — the circulation pump is not running.
- F8E4Water detected in the drip tray — empty the tray and check for leaks.
- H20Not detecting water — confirm the supply valve is open and the inlet hose is not kinked.
Dryer error codes
- AFRestricted airflow — the lint screen or vent is clogged, crushed, kinked, or has too many turns.
- L2Low or no line voltage — the heater cannot turn on. Electric dryers need both sides of a 240V breaker.
- PFPower failure — the drying cycle was interrupted. Hold Start to resume.
- F22Exhaust thermistor open — the dryer cannot read exhaust temperature.
Refrigerator error codes
- F3E1Refrigerator temperature or sensor fault — power-cycle, then confirm cooling is on.
- F3E2Freezer temperature sensor fault — the freezer thermistor reading is out of range.
- F5E1Defrost system fault — frost can build up and block airflow until the heater or bi-metal is checked.
- F7E1Evaporator fan fault — the freezer fan is iced, jammed, or not running.
- F8ECIce or water system fault — the ice maker or water valve circuit did not complete.
Oven / Range error codes
- F9E0Range wiring or voltage error — recent installs often have a miswired outlet.
- F1E0Oven control or wiring fault — reset the breaker for one minute.
- LOCControl lock is on — oven keys are locked.
- SABSabbath mode is on — cancel Sabbath to restore normal controls.
- PFPower failure (often shown as PF) — press Cancel and reset the clock.