Bosch dryer CRE
A care reminder. Clean the lint filter and run the care program.
- Dryer
- Not a breakdown
- No parts
Bosch dryer CRE, also shown as CrE, means it is time to run the basic appliance care program. It is a maintenance reminder, not a heating fault and not a failed control board. Series 6 and Series 8 tumble dryers display CRE when the dryer wants the lint path cleaned and the care program started. Clean the lint filter first, then start the basic appliance care program from the dryer menu. CRE should leave after that program finishes. Replacing a heating element or a board will not clear a care reminder.
Reviewed August 2025 · sources below
Safe to keep using?
No safety issue
This is a status or lock code, not a hardware fault.
How to fix CrE
- Clean the lint filter. If the dryer has a two-part filter, rinse the fine mesh until water flows through, then let it dry.
- Empty the condensate tank if this is a heat-pump dryer and the tank is full.
- Start the basic appliance care program from the dryer menu and let it finish.
- CRE should clear when the care program completes. It will return later as the next reminder.
- If the drum will not turn or the dryer will not heat, that is a different code. CRE by itself does not mean a part has failed.
Call a pro when: Call a technician if the dryer will not tumble or heat and a different code is showing. CRE alone is a care reminder.
Next step
Still having trouble after the code fix?
This code is usually a status or maintenance notice, not proof of a failed part. Try the steps above first; then describe what still isn't working.
Free guided checks · No account required · Don’t open live electrical, gas, or refrigerant equipment
What CrE means
Time to run the basic appliance care program — this is a maintenance reminder, not a fault.
Likely causes
Time to run the basic appliance care program — this is a maintenance reminder, not a fault.
Check: Clean the lint filter, then run the basic appliance care program.
Est. cost: $0–$0
If the status code returns after clearing it, something beyond a one-time glitch is wrong.
Check: Repeat the reset for Bosch CrE. If it returns on the next cycle, use our lookup tool or call a technician.
Est. cost: $0–$150
Guided repair checklist
Complete the safe checks one at a time. Progress is saved for this browser so you can continue later.
0 of 5 checks recorded
Recommended next action
Start with this check before considering replacement parts.
Check 1 of 5
Clean the lint filter. If the dryer has a two-part filter, rinse the fine mesh until water flows through, then let it dry.
Did the repair resolve the issue?
Restoring repair progress…
Questions about CrE
What does CRE mean on a Bosch dryer?
CRE (CrE) means it is time to run the basic appliance care program. It is a reminder, not a breakdown.
How do I fix a Bosch dryer CRE code?
Clean the lint filter, then run the basic appliance care program. No replacement part is required.
What does CRE mean on a Bosch Series 8 dryer?
On Series 8 and Series 6 Bosch dryers, CRE is the same care reminder. Run the basic appliance care program.
Do I need a part for Bosch CRE?
No. CRE clears after the care program. It is not a failed heater or board.
Other Bosch Dryer codes
Prevent this problem next time
- Clean the lint filter before the next care reminder
Sources
Manufacturer meaning
Time to run the basic appliance care program — this is a maintenance reminder, not a fault.
FixApplianceCode guidance
Run the basic appliance care program on the Bosch dryer. No replacement part is needed.
Source type: Editorial
Source: FixApplianceCode status-code guidance
Last reviewed: 2026-10-24
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
As an Amazon Associate I earn from qualifying purchases. Some links may also earn other retailer commissions, at no additional cost to you. Affiliate disclosure