Electrolux oven / range error codes list
Full list of 13 Electrolux oven / range error codes with meanings and fix steps. Open a code for the diagnosis.
Next step
Not sure what to check next?
Show a photo or describe the symptom. Answer a few safety-first questions and see whether a part is needed.
Free guided checks · No account required · Don’t open live electrical, gas, or refrigerant equipment
Electrolux oven / range error codes by model
- F10Thermal runaway — the oven is hotter than it should be. Turn it off and let it cool.
- F30Open probe — the meat probe circuit is open or the probe is not seated.
- F90Door lock fault — the door will not lock or unlock for self-clean.
- F11Shorted keypad — a key is stuck down. Turn power off for 30 seconds. If F11 returns at startup, the oven control needs replacement.
- F12Bad micro identification — the oven control failed its identity check. Power off for 30 seconds. If F12 returns, replace the oven control.
- F13EEPROM checksum error — the control memory failed its check. Power off for 30 seconds. If F13 returns, replace the oven control.
- F14Flat cables between the touch panel and the oven control are misconnected. Reseat the ribbon cables, then restore power.
- F15Oven control self-check failed. Power-cycle once. If F15 returns, the control board needs replacement.
- F31Shorted oven temperature probe or its wiring. Check the probe circuit before replacing the control.
- F91Door unlock attempts were exceeded. Check the latch motor and lock switch.
- F92Door-lock open time was exceeded. Check the latch motor, lock switch, and door switch.
- F93Door-lock time was exceeded while locking. Check the latch motor and lock switch.
- F94Door-lock attempts were exceeded. Check the latch motor and lock switch before replacing the control.
Looking for another appliance? All Electrolux error codes · All oven / range error codes