Electrolux Washer E11 error code
Washer
Reviewed August 2025 · sources below
On Electrolux washers, error E11 indicates: Fill timeout — no water entering. Start with a 5-minute power reset at the breaker, then follow the washer-specific checks below before ordering replacement parts for E11. If the code returns on two consecutive cycles after a reset, treat it as a confirmed fault — not a one-time power glitch.
Parts for this repair
We don't yet have a verified exact part number for this model. Search for a compatible water inlet valve.
Check current price & availability
FixApplianceCode may earn a commission from qualifying purchases.
Safe to keep using?
Safe for limited use
No immediate safety hazard detected, but monitor during use.
- • Monitor the appliance during use and stop if symptoms worsen.
2 product recalls may apply
Brand-level matches — verify your model.
Show
2 product recalls may apply
Brand-level matches — verify your model.
Likely causes
The shutoff valve is closed, or the inlet hose is crushed behind the appliance.
Check: Confirm household water is on, fully open the supply valve, and straighten the inlet hose.
Est. cost: $0–$0
The valve solenoid can stick or fail after years of use, so the tub never fills.
Check: If the supply is open and the hose screen is clean, the water inlet valve likely needs replacement.
Est. cost: $25–$75
What it means
Fill timeout — no water entering.
How to fix it
- Unplug the washer or turn off power at the breaker before inspecting any components.
- Reset Electrolux E11: leave power off for 5 minutes, restore power, then restart. Confirm whether E11 returns.
- Check the most common cause for E11: Fill timeout — no water entering.
- Inspect hoses, connections, and visible wiring for damage, clogs, or loose fittings.
- If a reset and basic checks don't clear the code, the fix often requires a replacement part (see recommended parts below).
- Reassemble, restore power, and run a test cycle. If E11 returns, the faulty component likely needs replacement.
Call a pro when: Call a technician if you smell burning, see sparking, hear grinding from the motor, or the code returns after replacing the suspected part.
FAQ
What does E11 error code mean on a Electrolux washer?
Fill timeout — no water entering.
How do I reset Electrolux washer E11?
Unplug the washer or switch it off at the breaker for 5 minutes, then restore power and restart. A reset clears a stored E11 after a glitch, but the code will return if the underlying fault is still present.
What part do I need for Electrolux E11?
Often yes — error E11 frequently points to a failed component. Check the recommended parts below for direct replacements.
Can I fix Electrolux error E11 myself?
Many E11 errors can be fixed DIY if you're comfortable with basic tools. Start with the reset and steps above. If the issue involves electrical components or the code returns after replacing parts, call a professional.
Electrolux E11 on specific models
Other Electrolux Washer codes
Prevent this problem next time
- Keep the water supply valve fully open
- Do not pinch the inlet hose during installation
Sources
Manufacturer meaning
Fill timeout — no water entering.
FixApplianceCode guidance
Open the supply valve and check the inlet hose before replacing the water inlet valve.
Source type: Part database
Source: ModelPartFinder + FixApplianceCode editorial
Last reviewed: 2026-09-21
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FixApplianceCode may earn a commission when you purchase through qualifying links, at no additional cost to you. Affiliate disclosure