Electrolux error codes (kode)
Electrolux kode means error code — find your code below to see what it means and how to fix it.
- Dishwasher
- Error code lookup
- All appliances
Looking up an Electrolux kode? The word 'kode' (code in Swedish and Norwegian) appears on Electrolux displays when the appliance detects a fault. Common Electrolux error codes include E11 (fill timeout on washers), E21 (drain error), i20 (dishwasher drain restricted), and SY EF (refrigerator evaporator fan fault). Select your code from the list below for the meaning, reset steps, and parts that usually fix it.
Reviewed August 2025 · sources below
Safe to keep using?
Safe for limited use
No immediate safety hazard detected, but monitor during use.
- • Monitor the appliance during use and stop if symptoms worsen.
Next step
Still seeing KODE?
Show a photo or describe the symptom. Answer a few safety-first questions and see whether a part is needed.
Free guided checks · No account required · Don’t open live electrical, gas, or refrigerant equipment
How to fix KODE
- Note the exact code on your Electrolux display — letters and numbers matter (E11 is different from E21).
- Match your code to the Electrolux error code list below.
- Follow the reset and fix steps on that code's page.
- If no code matches, use the error code lookup tool with your model number for AI-powered diagnosis.
Call a pro when: Call a technician if the code returns after a reset and basic troubleshooting, or if the code points to a sealed system (compressor, refrigerant) on a refrigerator.
What KODE means
Error code lookup page — 'kode' is Swedish/Norwegian for error code. Find your specific code in our Electrolux error code list.
Likely causes
Many codes resolve with cleaning, resetting, or reconnecting.
Check: Power-cycle the appliance and check for obvious blockages or loose connections.
Est. cost: $0–$0
Wear or electrical failure of an internal part.
Check: If basic checks fail, the faulty component likely needs replacement.
Est. cost: $0–$75
Guided repair checklist
Complete the safe checks one at a time. Progress is saved for this browser so you can continue later.
0 of 4 checks recorded
Recommended next action
Start with this check before considering replacement parts.
Check 1 of 4
Note the exact code on your Electrolux display — letters and numbers matter (E11 is different from E21).
Did the repair resolve the issue?
Restoring repair progress…
Questions about KODE
What does kode mean on Electrolux?
Kode means error code — the appliance detected a fault and is showing a diagnostic code. Match the code to the list below for the meaning and fix.
How do I find my Electrolux error code?
The error code (kode) appears on the display when the appliance stops. Write down the exact letters and numbers, then look it up below.
What are common Electrolux error codes?
Common codes include E11 (no fill), E21 (no drain), i20 (dishwasher drain restricted), i30 (leak detected), and SY EF (evaporator fan fault on refrigerators).
How do I reset an Electrolux error code?
Most Electrolux codes clear after you fix the underlying issue and power-cycle the appliance for 5 minutes. Some codes like i30 require the leak sensor to dry before the reset works.
Other Electrolux Dishwasher codes
Prevent this problem next time
- Follow manufacturer maintenance schedule
- Address small issues before they worsen
Sources
Manufacturer meaning
Error code lookup page — 'kode' is Swedish/Norwegian for error code. Find your specific code in our Electrolux error code list.
FixApplianceCode guidance
Start with basic checks for Electrolux KODE before ordering parts.
Source type: Part database
Source: ModelPartFinder + FixApplianceCode editorial
Last reviewed: 2026-11-05
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
As an Amazon Associate I earn from qualifying purchases. Some links may also earn other retailer commissions, at no additional cost to you. Affiliate disclosure