Frigidaire Dryer E25 error code
Dryer
Frigidaire dryer error code E25 means: Thermistor error — the temperature sensor circuit is out of range. This guide covers how to reset the code, the most common causes, step-by-step troubleshooting, and replacement parts that typically resolve E25.
Safe to keep using?
Stop using
No immediate safety hazard detected, but monitor during use.
- • Unplug the appliance before inspection.
- • Turn off the water supply before disconnecting hoses.
- • Do not continue using the appliance until the cause is identified.
1 product recall may apply
Brand-level matches — verify your model.
Show
1 product recall may apply
Brand-level matches — verify your model.
- Notice
Electrolux Group Recalls Frigidaire Gas Laundry Centers Due to Fire Hazard
Jul 2023 · Confirm your model
Likely causes
Many codes resolve with cleaning, resetting, or reconnecting.
Check: Power-cycle the appliance and check for obvious blockages or loose connections.
Est. cost: $0–$0
Wear or electrical failure of an internal part.
Check: If basic checks fail, the faulty component likely needs replacement.
Est. cost: $0–$100
What it means
Thermistor error — the temperature sensor circuit is out of range.
How to fix it
- Unplug the dryer or turn off power at the breaker before inspecting any components.
- Reset Frigidaire E25: leave power off for 5 minutes, restore power, then restart. Confirm whether E25 returns.
- Check the most common cause for E25: Thermistor error — the temperature sensor circuit is out of range.
- Inspect hoses, connections, and visible wiring for damage, clogs, or loose fittings.
- If a reset and basic checks don't clear the code, use our lookup tool for AI-powered diagnosis or contact a qualified technician.
- Reassemble, restore power, and run a test cycle. If E25 returns, the faulty component likely needs replacement.
Call a pro when: Call a technician if you smell burning, see sparking, hear grinding from the motor, or the code returns after replacing the suspected part.
FAQ
What does E25 error code mean on a Frigidaire dryer?
Thermistor error — the temperature sensor circuit is out of range.
What does Frigidaire E25 mean?
Thermistor error — the temperature sensor circuit is out of range.
How do I reset Frigidaire dryer E25?
Unplug the dryer or switch it off at the breaker for 5 minutes, then restore power and restart. A reset clears a stored E25 after a glitch, but the code will return if the underlying fault is still present.
What part do I need for Frigidaire E25?
Not always — some E25 errors are caused by user-fixable issues like clogs or unbalanced loads. Try the troubleshooting steps first.
Can I fix Frigidaire error E25 myself?
Many E25 errors can be fixed DIY if you're comfortable with basic tools. Start with the reset and steps above. If the issue involves electrical components or the code returns after replacing parts, call a professional.
Do I need a replacement part for E25?
Not always — some E25 errors are caused by user-fixable issues like clogs or unbalanced loads. Try the troubleshooting steps first.
Other Frigidaire Dryer codes
Prevent this problem next time
- Follow manufacturer maintenance schedule
- Address small issues before they worsen
Sources
Manufacturer meaning
Thermistor error — the temperature sensor circuit is out of range.
FixApplianceCode guidance
Start with basic checks for Frigidaire E25 before ordering parts.
Source type: Part database
Source: ModelPartFinder + FixApplianceCode editorial
Last reviewed: 2026-08-24
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FixApplianceCode may earn a commission when you purchase through qualifying links, at no additional cost to you. Affiliate disclosure