Frigidaire Dishwasher i10 error code
Dishwasher
Frigidaire dishwasher error code i10 means: Low water level — the tub is not filling enough. Check the supply valve and inlet hose. This guide covers how to reset the code, the most common causes, step-by-step troubleshooting, and replacement parts that typically resolve i10.
Safe to keep using?
Stop using
No immediate safety hazard detected, but monitor during use.
- • Unplug the appliance before inspection.
- • Do not continue using the appliance until the cause is identified.
1 product recall may apply
Brand-level matches — verify your model.
Show
1 product recall may apply
Brand-level matches — verify your model.
- Notice
Certain Sears Kenmore Dishwashers May Pose Fire Hazard
Feb 1993 · Confirm your model
Likely causes
Many codes resolve with cleaning, resetting, or reconnecting.
Check: Power-cycle the appliance and check for obvious blockages or loose connections.
Est. cost: $0–$0
Wear or electrical failure of an internal part.
Check: If basic checks fail, the faulty component likely needs replacement.
Est. cost: $0–$75
What it means
Low water level — the tub is not filling enough. Check the supply valve and inlet hose.
How to fix it
- Unplug the dishwasher or turn off power at the breaker before inspecting any components.
- Reset Frigidaire i10: leave power off for 5 minutes, restore power, then restart. Confirm whether i10 returns.
- Check the most common cause for i10: Low water level — the tub is not filling enough. Check the supply valve and inlet hose.
- Inspect hoses, connections, and visible wiring for damage, clogs, or loose fittings.
- If a reset and basic checks don't clear the code, use our lookup tool for AI-powered diagnosis or contact a qualified technician.
- Reassemble, restore power, and run a test cycle. If i10 returns, the faulty component likely needs replacement.
Call a pro when: Call a technician if you smell burning, see sparking, hear grinding from the motor, or the code returns after replacing the suspected part.
Repair videos
FAQ
What does i10 error code mean on a Frigidaire dishwasher?
Low water level — the tub is not filling enough. Check the supply valve and inlet hose.
What does Frigidaire i10 mean?
Low water level — the tub is not filling enough. Check the supply valve and inlet hose.
How do I reset Frigidaire dishwasher i10?
Unplug the dishwasher or switch it off at the breaker for 5 minutes, then restore power and restart. A reset clears a stored i10 after a glitch, but the code will return if the underlying fault is still present.
What part do I need for Frigidaire i10?
Not always — some i10 errors are caused by user-fixable issues like clogs or unbalanced loads. Try the troubleshooting steps first.
Can I fix Frigidaire error i10 myself?
Many i10 errors can be fixed DIY if you're comfortable with basic tools. Start with the reset and steps above. If the issue involves electrical components or the code returns after replacing parts, call a professional.
Do I need a replacement part for i10?
Not always — some i10 errors are caused by user-fixable issues like clogs or unbalanced loads. Try the troubleshooting steps first.
Other Frigidaire Dishwasher codes
Prevent this problem next time
- Follow manufacturer maintenance schedule
- Address small issues before they worsen
Sources
Manufacturer meaning
Low water level — the tub is not filling enough. Check the supply valve and inlet hose.
FixApplianceCode guidance
Start with basic checks for Frigidaire i10 before ordering parts.
Source type: Part database
Source: ModelPartFinder + FixApplianceCode editorial
Last reviewed: 2026-08-24
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FixApplianceCode may earn a commission when you purchase through qualifying links, at no additional cost to you. Affiliate disclosure