FixApplianceCode logo — appliance error code lookup and repair guidesFixApplianceCode

Maytag refrigerator F3E2 error code

Refrigerator

Reviewed August 2025 · sources below

On Maytag French-door and side-by-side refrigerators, F3E2 means the freezer thermistor reading is out of range — the control cannot trust the freezer temperature. Heavy frost on the evaporator cover often distorts the reading before the sensor itself fails. On WRF535/MFI2570/KRFF507-class cabinets, start with a full defrost and confirm the freezer fan runs when the compressor is on.

Parts for this repair

We don't yet have a verified exact part number for this model. Search for a compatible Freezer temperature sensor.

Search compatible parts on Amazon →

Check current price & availability

FixApplianceCode may earn a commission from qualifying purchases.

Safe to keep using?

Stop using

No immediate safety hazard detected, but monitor during use.

  • Unplug the appliance before inspection.
  • Do not continue using the appliance until the cause is identified.

4 product recalls may apply

Brand-level matches — verify your model.

Show
  • Maytag Expands Recall of Refrigerators Due to Fire Hazard

    Aug 2009 · Confirm your model

    Notice
  • Maytag Recalls Refrigerators Due to Fire Hazard

    Mar 2009 · Confirm your model

    Notice
  • CPSC, Maytag Corporation Announce Recall of Kenmore Elite-Brand TRIO Model Refrigerators

    Apr 2003 · Confirm your model

    Notice
  • CPSC, W.C. Wood Co. Announce Recall Of 345,775 Freezers

    Feb 1996 · Confirm your model

    Notice
DIY Difficulty
5 /10MODERATE

DIY difficulty: 5/10 — this repair usually requires appliance disassembly, electrical testing.

Time: 30–60 minutes
Risk: Moderate
Skill: Intermediate
Tools: Screwdriver, Adjustable pliers, Multimeter, Flashlight, Work gloves, Socket set
Power disconnect requiredDisassembly required

Likely causes

Most likelyUser-serviceable issue

Many codes resolve with cleaning, resetting, or reconnecting.

Check: Power-cycle the appliance and check for obvious blockages or loose connections.

Est. cost: $0–$0

PossibleFailed component

Wear or electrical failure of an internal part.

Check: If basic checks fail, the faulty component likely needs replacement.

Est. cost: $0–$100

Repair or Replace?

DIY repair

$35–$65

Professional repair

$223–$302

Comparable replacement

$723–$977

Our recommendation

REPAIR LIKELY MAKES SENSE

REPAIR LIKELY MAKES SENSE. Professional repair ($223–$302) is well below replacement cost.

Actual repair and replacement costs vary by model, location, labor rate, and condition.

What it means

Freezer temperature sensor fault — the freezer thermistor reading is out of range.

How to fix it

  1. Unplug the refrigerator or turn off the breaker for 5 minutes, then restore power to clear a stored F3E2.
  2. Open the freezer and inspect the evaporator cover — if frost blocks the fan, unplug and thaw 24 hours with doors open and towels in the freezer.
  3. With power off, locate the freezer thermistor clipped to the evaporator coil; check for loose harness connectors at the main board.
  4. If frost returns within a week after thawing, test the defrost heater and bi-metal before replacing the thermistor.
  5. Reassemble, restore power, and monitor freezer temperature for 24 hours — F3E2 should not return if the sensor circuit is healthy.

Call a pro when: Call a technician if frost returns within days after thawing, you smell burning from the defrost area, or F3E2 persists after thermistor replacement.

FAQ

What does F3E2 mean on a Maytag refrigerator?

F3E2 is a freezer temperature sensor fault — the thermistor reading is out of range or the control lost communication with the sensor.

How do I reset Maytag refrigerator F3E2?

Power off for 5 minutes at the breaker. If heavy frost caused the fault, complete a manual thaw before restarting.

Do I need a part for Maytag F3E2?

Often the freezer thermistor after ruling out defrost failure. Frost buildup alone can trigger F3E2 without a bad sensor.

Can I fix Maytag F3E2 myself?

Thawing and connector checks are DIY-friendly. Thermistor replacement needs basic tools and unplugging the unit.

Maytag F3E2 on specific models

Other Maytag Refrigerator codes

Prevent this problem next time

  • Follow manufacturer maintenance schedule
  • Address small issues before they worsen

Sources

Manufacturer meaning

Freezer temperature sensor fault — the freezer thermistor reading is out of range.

FixApplianceCode guidance

Start with basic checks for Maytag F3E2 before ordering parts.

Source type: Part database

Source: ModelPartFinder + FixApplianceCode editorial

Last reviewed: 2026-08-24

Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer

FixApplianceCode may earn a commission when you purchase through qualifying links, at no additional cost to you. Affiliate disclosure

Get AI-powered fix steps for Maytag F3E2