SHEM63W55N E22 error
Your Bosch SHEM63W55N is showing E22. Before replacing parts, confirm the model tag matches SHEM63W55N: Open the door and look on the inner door edge or left/right side of the tub opening. On this Bosch dishwasher, E22 means Filter blocked or drain restricted. The steps below follow the field-service order for the SHEM63W55N platform — not the generic Bosch E22 page. Parts listed below are confirmed compatible with SHEM63W55N. If the code cleared after a reset but returned mid-cycle, treat that as a confirmed fault rather than a one-time glitch.
Buy the replacement part
MPN: 00611322
$54.99
Fix steps
- Verify the model tag reads SHEM63W55N — Open the door and look on the inner door edge or left/right side of the tub opening.
- Reset E22: unplug the dishwasher or switch off the breaker for 5 minutes, then restore power.
- Remove and clean the tub filter, confirm the inlet valve screen is clear, and check the door gasket before assuming a pump or valve failure for E22.
- Parts listed below are confirmed compatible with SHEM63W55N.
- Run a test cycle after repair. If the code returns, use the compatible parts below or the full brand code guide.
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FAQ
What does E22 mean on a Bosch SHEM63W55N?
Filter blocked or drain restricted.
How do I reset E22 on a SHEM63W55N?
Unplug the dishwasher or switch it off at the breaker for 5 minutes, then restore power and restart. If E22 returns on the SHEM63W55N, the underlying fault is still present.
What part do I need for SHEM63W55N E22?
Start with the SHEM63W55N-compatible parts listed below. E22 often points to a failed component on this Bosch dishwasher.
Is E22 on the SHEM63W55N easy to fix?
Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.