FixApplianceCode logo — appliance error code lookup and repair guidesFixApplianceCode

SHPM88Z75N E24 error

Your Bosch SHPM88Z75N is showing E24. Before replacing parts, confirm the model tag matches SHPM88Z75N: Open the door and look on the inner door edge or left/right side of the tub opening. On this Bosch dishwasher, E24 means Drain error — water not draining. The steps below follow the field-service order for the SHPM88Z75N platform — not the generic Bosch E24 page. Parts listed below are confirmed compatible with SHPM88Z75N. If the code cleared after a reset but returned mid-cycle, treat that as a confirmed fault rather than a one-time glitch.

Buy the replacement part

Bosch Dishwasher Drain Pump

MPN: 00611322

Check current price on Amazon

Amazon link · paid affiliate link. Confirm fit and listing before ordering.

Dishwasher Circulation Pump

MPN: W10876537

Check current price on Amazon

Amazon link · paid affiliate link. Confirm fit and listing before ordering.

Fix steps

  1. Verify the model tag reads SHPM88Z75N — Open the door and look on the inner door edge or left/right side of the tub opening.
  2. Reset E24: unplug the dishwasher or switch off the breaker for 5 minutes, then restore power.
  3. Remove and clean the tub filter, confirm the inlet valve screen is clear, and check the door gasket before assuming a pump or valve failure for E24.
  4. Parts listed below are confirmed compatible with SHPM88Z75N.
  5. Run a test cycle after repair. If the code returns, use the compatible parts below or the full brand code guide.

Guided repair checklist

Complete the safe checks one at a time. Progress is saved for this browser so you can continue later.

0 of 5 checks recorded

Recommended next action

Start with this check before considering replacement parts.

Check 1 of 5

Verify the model tag reads SHPM88Z75N — Open the door and look on the inner door edge or left/right side of the tub opening.

Did the repair resolve the issue?

Restoring repair progress…

Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer

FAQ

What does E24 mean on a Bosch SHPM88Z75N?

Drain error — water not draining.

How do I reset E24 on a SHPM88Z75N?

Unplug the dishwasher or switch it off at the breaker for 5 minutes, then restore power and restart. If E24 returns on the SHPM88Z75N, the underlying fault is still present.

What part do I need for SHPM88Z75N E24?

Start with the SHPM88Z75N-compatible parts listed below. E24 often points to a failed component on this Bosch dishwasher.

Is E24 on the SHPM88Z75N easy to fix?

Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.

See general Bosch E24 guide →

As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure