SHPM88Z75N E25 error
Your Bosch SHPM88Z75N is showing E25. Before replacing parts, confirm the model tag matches SHPM88Z75N: Open the door and look on the inner door edge or left/right side of the tub opening. On this Bosch dishwasher, E25 means Drain pump blocked or faulty. The steps below follow the field-service order for the SHPM88Z75N platform — not the generic Bosch E25 page. Parts listed below are confirmed compatible with SHPM88Z75N. If the code cleared after a reset but returned mid-cycle, treat that as a confirmed fault rather than a one-time glitch.
Buy the replacement part
MPN: 00611322
$54.99
Fix steps
- Verify the model tag reads SHPM88Z75N — Open the door and look on the inner door edge or left/right side of the tub opening.
- Reset E25: unplug the dishwasher or switch off the breaker for 5 minutes, then restore power.
- Remove and clean the tub filter, confirm the inlet valve screen is clear, and check the door gasket before assuming a pump or valve failure for E25.
- Parts listed below are confirmed compatible with SHPM88Z75N.
- Run a test cycle after repair. If the code returns, use the compatible parts below or the full brand code guide.
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FAQ
What does E25 mean on a Bosch SHPM88Z75N?
Drain pump blocked or faulty.
How do I reset E25 on a SHPM88Z75N?
Unplug the dishwasher or switch it off at the breaker for 5 minutes, then restore power and restart. If E25 returns on the SHPM88Z75N, the underlying fault is still present.
What part do I need for SHPM88Z75N E25?
Start with the SHPM88Z75N-compatible parts listed below. E25 often points to a failed component on this Bosch dishwasher.
Is E25 on the SHPM88Z75N easy to fix?
Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.