WAW285H2UC E13 error
Your Bosch WAW285H2UC is showing E13. Before replacing parts, confirm the model tag matches WAW285H2UC: Open the door and check the rim or door frame; the silver sticker is also on the rear panel near the top. On this Bosch washer, E13 means Door lock fault — door not locking before cycle starts. The steps below follow the field-service order for the WAW285H2UC platform — not the generic Bosch E13 page. Cross-check part fit with WAW285H2UC before ordering — use the model-specific parts diagram. If the code cleared after a reset but returned mid-cycle, treat that as a confirmed fault rather than a one-time glitch.
Fix steps
- Verify the model tag reads WAW285H2UC — Open the door and check the rim or door frame; the silver sticker is also on the rear panel near the top.
- Reset E13: unplug the washer or switch off the breaker for 5 minutes, then restore power.
- Check inlet hoses, drain hose routing, and the door seal for obstructions or leaks before assuming an internal component failed for E13.
- Cross-check part fit with WAW285H2UC before ordering — use the model-specific parts diagram.
- Run a test cycle after repair. If the code returns, use the compatible parts below or the full brand code guide.
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FAQ
What does E13 mean on a Bosch WAW285H2UC?
Door lock fault — door not locking before cycle starts.
How do I reset E13 on a WAW285H2UC?
Unplug the washer or switch it off at the breaker for 5 minutes, then restore power and restart. If E13 returns on the WAW285H2UC, the underlying fault is still present.
What part do I need for WAW285H2UC E13?
Try the reset and troubleshooting steps first. E13 on the WAW285H2UC is not always a failed part.
Is E13 on the WAW285H2UC easy to fix?
Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.