FixApplianceCode logo — appliance error code lookup and repair guidesFixApplianceCode

EFLS627UTT E21 error

Your Electrolux EFLS627UTT is showing E21. Before replacing parts, confirm the model tag matches EFLS627UTT: Open the door and check the rim or door frame; the silver sticker is also on the rear panel near the top. On this Electrolux washer, E21 means Drain error. The steps below follow the field-service order for the EFLS627UTT platform — not the generic Electrolux E21 page. Parts listed below are confirmed compatible with EFLS627UTT. If the code cleared after a reset but returned mid-cycle, treat that as a confirmed fault rather than a one-time glitch.

Buy the replacement part

Electrolux Washer Drain Pump

MPN: 137221600

Check current price on Amazon

Amazon link · paid affiliate link. Confirm fit and listing before ordering.

Fix steps

  1. Verify the model tag reads EFLS627UTT — Open the door and check the rim or door frame; the silver sticker is also on the rear panel near the top.
  2. Reset E21: unplug the washer or switch off the breaker for 5 minutes, then restore power.
  3. Check inlet hoses, drain hose routing, and the door seal for obstructions or leaks before assuming an internal component failed for E21.
  4. Parts listed below are confirmed compatible with EFLS627UTT.
  5. Run a test cycle after repair. If the code returns, use the compatible parts below or the full brand code guide.

Guided repair checklist

Complete the safe checks one at a time. Progress is saved for this browser so you can continue later.

0 of 5 checks recorded

Recommended next action

Start with this check before considering replacement parts.

Check 1 of 5

Verify the model tag reads EFLS627UTT — Open the door and check the rim or door frame; the silver sticker is also on the rear panel near the top.

Did the repair resolve the issue?

Restoring repair progress…

Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer

FAQ

What does E21 mean on a Electrolux EFLS627UTT?

Drain error.

How do I reset E21 on a EFLS627UTT?

Unplug the washer or switch it off at the breaker for 5 minutes, then restore power and restart. If E21 returns on the EFLS627UTT, the underlying fault is still present.

What part do I need for EFLS627UTT E21?

Start with the EFLS627UTT-compatible parts listed below. E21 often points to a failed component on this Electrolux washer.

Is E21 on the EFLS627UTT easy to fix?

Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.

See general Electrolux E21 guide →

As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure