FixApplianceCode logo — appliance error code lookup and repair guidesFixApplianceCode

EFME627UTT E4A error

Your Electrolux EFME627UTT is showing E4A. Before replacing parts, confirm the model tag matches EFME627UTT: Check the door frame, inside the door opening, or the rear panel near the exhaust. On this Electrolux dryer, E4A means Long dry time — the cycle exceeded the program limit, usually from a clogged vent. The steps below follow the field-service order for the EFME627UTT platform — not the generic Electrolux E4A page. Cross-check part fit with EFME627UTT before ordering — use the model-specific parts diagram. If the code cleared after a reset but returned mid-cycle, treat that as a confirmed fault rather than a one-time glitch.

Fix steps

  1. Verify the model tag reads EFME627UTT — Check the door frame, inside the door opening, or the rear panel near the exhaust.
  2. Reset E4A: unplug the dryer or switch off the breaker for 5 minutes, then restore power.
  3. Clean the lint screen, inspect the exhaust hose and exterior vent hood, and confirm electric dryers have both legs of 240V power for E4A.
  4. Cross-check part fit with EFME627UTT before ordering — use the model-specific parts diagram.
  5. Run a test cycle after repair. If the code returns, use the compatible parts below or the full brand code guide.

Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer

FAQ

What does E4A mean on a Electrolux EFME627UTT?

Long dry time — the cycle exceeded the program limit, usually from a clogged vent.

How do I reset E4A on a EFME627UTT?

Unplug the dryer or switch it off at the breaker for 5 minutes, then restore power and restart. If E4A returns on the EFME627UTT, the underlying fault is still present.

What part do I need for EFME627UTT E4A?

Try the reset and troubleshooting steps first. E4A on the EFME627UTT is not always a failed part.

Is E4A on the EFME627UTT easy to fix?

Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.

See general Electrolux E4A guide →