EI24ID80WS E13 error
Your Electrolux EI24ID80WS is showing E13. Before replacing parts, confirm the model tag matches EI24ID80WS: Open the door and look on the inner door edge or left/right side of the tub opening. On this Electrolux dishwasher, E13 means Fill timeout. The steps below follow the field-service order for the EI24ID80WS platform — not the generic Electrolux E13 page. Cross-check part fit with EI24ID80WS before ordering — use the model-specific parts diagram. If the code cleared after a reset but returned mid-cycle, treat that as a confirmed fault rather than a one-time glitch.
Parts for this repair
We don't yet have a verified exact part number for this model. Search for a compatible water inlet valve.
Check current price & availability
FixApplianceCode may earn a commission from qualifying purchases.
Fix steps
- Verify the model tag reads EI24ID80WS — Open the door and look on the inner door edge or left/right side of the tub opening.
- Reset E13: unplug the dishwasher or switch off the breaker for 5 minutes, then restore power.
- Remove and clean the tub filter, confirm the inlet valve screen is clear, and check the door gasket before assuming a pump or valve failure for E13.
- Cross-check part fit with EI24ID80WS before ordering — use the model-specific parts diagram.
- Run a test cycle after repair. If the code returns, use the compatible parts below or the full brand code guide.
Guided repair checklist
Complete the safe checks one at a time. Progress is saved for this browser so you can continue later.
0 of 5 checks recorded
Recommended next action
Start with this check before considering replacement parts.
Check 1 of 5
Verify the model tag reads EI24ID80WS — Open the door and look on the inner door edge or left/right side of the tub opening.
Did the repair resolve the issue?
Restoring repair progress…
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FAQ
What does E13 mean on a Electrolux EI24ID80WS?
Fill timeout.
How do I reset E13 on a EI24ID80WS?
Unplug the dishwasher or switch it off at the breaker for 5 minutes, then restore power and restart. If E13 returns on the EI24ID80WS, the underlying fault is still present.
What part do I need for EI24ID80WS E13?
Start with the EI24ID80WS-compatible parts listed below. E13 often points to a failed component on this Electrolux dishwasher.
Is E13 on the EI24ID80WS easy to fix?
Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.