FixApplianceCode logo — appliance error code lookup and repair guidesFixApplianceCode

EI24ID80WS i20 error

Your Electrolux EI24ID80WS is showing i20. Before replacing parts, confirm the model tag matches EI24ID80WS: Open the door and look on the inner door edge or left/right side of the tub opening. On this Electrolux dishwasher, i20 means Drain line restricted — clean the filter and check the hose. The steps below follow the field-service order for the EI24ID80WS platform — not the generic Electrolux i20 page. Cross-check part fit with EI24ID80WS before ordering — use the model-specific parts diagram. If the code cleared after a reset but returned mid-cycle, treat that as a confirmed fault rather than a one-time glitch.

Fix steps

  1. Verify the model tag reads EI24ID80WS — Open the door and look on the inner door edge or left/right side of the tub opening.
  2. Reset i20: unplug the dishwasher or switch off the breaker for 5 minutes, then restore power.
  3. Remove and clean the tub filter, confirm the inlet valve screen is clear, and check the door gasket before assuming a pump or valve failure for i20.
  4. Cross-check part fit with EI24ID80WS before ordering — use the model-specific parts diagram.
  5. Run a test cycle after repair. If the code returns, use the compatible parts below or the full brand code guide.

Professional assistance recommended

This issue may be unsafe for DIY repair. Follow the safety guidance above and contact a qualified technician.

Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer

FAQ

What does i20 mean on a Electrolux EI24ID80WS?

Drain line restricted — clean the filter and check the hose.

How do I reset i20 on a EI24ID80WS?

Unplug the dishwasher or switch it off at the breaker for 5 minutes, then restore power and restart. If i20 returns on the EI24ID80WS, the underlying fault is still present.

What part do I need for EI24ID80WS i20?

Try the reset and troubleshooting steps first. i20 on the EI24ID80WS is not always a failed part.

Is i20 on the EI24ID80WS easy to fix?

Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.

See general Electrolux i20 guide →

As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure