FGID2479SF E20 error
Your Frigidaire FGID2479SF is showing E20. Before replacing parts, confirm the model tag matches FGID2479SF: Open the door and look on the inner door edge or left/right side of the tub opening. On this Frigidaire dishwasher, E20 means Drain error. The steps below follow the field-service order for the FGID2479SF platform — not the generic Frigidaire E20 page. Parts listed below are confirmed compatible with FGID2479SF. If the code cleared after a reset but returned mid-cycle, treat that as a confirmed fault rather than a one-time glitch.
Buy the replacement part
MPN: 154637401
$39.99
Fix steps
- Verify the model tag reads FGID2479SF — Open the door and look on the inner door edge or left/right side of the tub opening.
- Reset E20: unplug the dishwasher or switch off the breaker for 5 minutes, then restore power.
- Remove and clean the tub filter, confirm the inlet valve screen is clear, and check the door gasket before assuming a pump or valve failure for E20.
- Parts listed below are confirmed compatible with FGID2479SF.
- Run a test cycle after repair. If the code returns, use the compatible parts below or the full brand code guide.
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FAQ
What does E20 mean on a Frigidaire FGID2479SF?
Drain error.
How do I reset E20 on a FGID2479SF?
Unplug the dishwasher or switch it off at the breaker for 5 minutes, then restore power and restart. If E20 returns on the FGID2479SF, the underlying fault is still present.
What part do I need for FGID2479SF E20?
Start with the FGID2479SF-compatible parts listed below. E20 often points to a failed component on this Frigidaire dishwasher.
Is E20 on the FGID2479SF easy to fix?
Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.