FGID2479SF i30 error
Your Frigidaire FGID2479SF is showing i30. Before replacing parts, confirm the model tag matches FGID2479SF: Open the door and look on the inner door edge or left/right side of the tub opening. On this Frigidaire dishwasher, i30 means Leak detected in the bottom pan. The steps below follow the field-service order for the FGID2479SF platform — not the generic Frigidaire i30 page. Parts listed below are confirmed compatible with FGID2479SF. If the code cleared after a reset but returned mid-cycle, treat that as a confirmed fault rather than a one-time glitch.
Buy the replacement part
MPN: 154637401
$39.99
Fix steps
- Verify the model tag reads FGID2479SF — Open the door and look on the inner door edge or left/right side of the tub opening.
- Reset i30: unplug the dishwasher or switch off the breaker for 5 minutes, then restore power.
- Remove and clean the tub filter, confirm the inlet valve screen is clear, and check the door gasket before assuming a pump or valve failure for i30.
- Parts listed below are confirmed compatible with FGID2479SF.
- Run a test cycle after repair. If the code returns, use the compatible parts below or the full brand code guide.
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FAQ
What does i30 mean on a Frigidaire FGID2479SF?
Leak detected in the bottom pan.
How do I reset i30 on a FGID2479SF?
Unplug the dishwasher or switch it off at the breaker for 5 minutes, then restore power and restart. If i30 returns on the FGID2479SF, the underlying fault is still present.
What part do I need for FGID2479SF i30?
Start with the FGID2479SF-compatible parts listed below. i30 often points to a failed component on this Frigidaire dishwasher.
Is i30 on the FGID2479SF easy to fix?
Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.