FGID2479SF i60 error
Your Frigidaire FGID2479SF is showing i60. Before replacing parts, confirm the model tag matches FGID2479SF: Open the door and look on the inner door edge or left/right side of the tub opening. On this Frigidaire dishwasher, i60 means Heating element fault — water is not reaching wash temperature. The steps below follow the field-service order for the FGID2479SF platform — not the generic Frigidaire i60 page. Cross-check part fit with FGID2479SF before ordering — use the model-specific parts diagram. If the code cleared after a reset but returned mid-cycle, treat that as a confirmed fault rather than a one-time glitch.
Parts for this repair
We don't yet have a verified exact part number for this model. Search for a compatible Heating element.
Check current price & availability
FixApplianceCode may earn a commission from qualifying purchases.
Fix steps
- Verify the model tag reads FGID2479SF — Open the door and look on the inner door edge or left/right side of the tub opening.
- Reset i60: unplug the dishwasher or switch off the breaker for 5 minutes, then restore power.
- Remove and clean the tub filter, confirm the inlet valve screen is clear, and check the door gasket before assuming a pump or valve failure for i60.
- Cross-check part fit with FGID2479SF before ordering — use the model-specific parts diagram.
- Run a test cycle after repair. If the code returns, use the compatible parts below or the full brand code guide.
Professional assistance recommended
This issue may be unsafe for DIY repair. Follow the safety guidance above and contact a qualified technician.
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FAQ
What does i60 mean on a Frigidaire FGID2479SF?
Heating element fault — water is not reaching wash temperature.
How do I reset i60 on a FGID2479SF?
Unplug the dishwasher or switch it off at the breaker for 5 minutes, then restore power and restart. If i60 returns on the FGID2479SF, the underlying fault is still present.
What part do I need for FGID2479SF i60?
Try the reset and troubleshooting steps first. i60 on the FGID2479SF is not always a failed part.
Is i60 on the FGID2479SF easy to fix?
Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.