GDT665SSNSS C5 error
Your GE GDT665SSNSS is showing C5. Before replacing parts, confirm the model tag matches GDT665SSNSS: Open the door and look on the inner door edge or left/right side of the tub opening. On this GE dishwasher, C5 means Pump-out time is too short — often a closed water supply or a stuck float. The steps below follow the field-service order for the GDT665SSNSS platform — not the generic GE C5 page. Cross-check part fit with GDT665SSNSS before ordering — use the model-specific parts diagram. If the code cleared after a reset but returned mid-cycle, treat that as a confirmed fault rather than a one-time glitch.
Parts for this repair
We don't yet have a verified exact part number for this model. Search for a compatible water inlet valve.
Check current price & availability
FixApplianceCode may earn a commission from qualifying purchases.
Fix steps
- Verify the model tag reads GDT665SSNSS — Open the door and look on the inner door edge or left/right side of the tub opening.
- Reset C5: unplug the dishwasher or switch off the breaker for 5 minutes, then restore power.
- Remove and clean the tub filter, confirm the inlet valve screen is clear, and check the door gasket before assuming a pump or valve failure for C5.
- Cross-check part fit with GDT665SSNSS before ordering — use the model-specific parts diagram.
- Run a test cycle after repair. If the code returns, use the compatible parts below or the full brand code guide.
Guided repair checklist
Complete the safe checks one at a time. Progress is saved for this browser so you can continue later.
0 of 5 checks recorded
Recommended next action
Start with this check before considering replacement parts.
Check 1 of 5
Verify the model tag reads GDT665SSNSS — Open the door and look on the inner door edge or left/right side of the tub opening.
Did the repair resolve the issue?
Restoring repair progress…
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FAQ
What does C5 mean on a GE GDT665SSNSS?
Pump-out time is too short — often a closed water supply or a stuck float.
How do I reset C5 on a GDT665SSNSS?
Unplug the dishwasher or switch it off at the breaker for 5 minutes, then restore power and restart. If C5 returns on the GDT665SSNSS, the underlying fault is still present.
What part do I need for GDT665SSNSS C5?
Try the reset and troubleshooting steps first. C5 on the GDT665SSNSS is not always a failed part.
Is C5 on the GDT665SSNSS easy to fix?
Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.