GDT665SSNSS PF1 error
Your GE GDT665SSNSS is showing PF1. Before replacing parts, confirm the model tag matches GDT665SSNSS: Open the door and look on the inner door edge or left/right side of the tub opening. On this GE dishwasher, PF1 means Power failure (often shown as PF) — select a cycle and press Start to resume. The steps below follow the field-service order for the GDT665SSNSS platform — not the generic GE PF1 page. Cross-check part fit with GDT665SSNSS before ordering — use the model-specific parts diagram. If the code cleared after a reset but returned mid-cycle, treat that as a confirmed fault rather than a one-time glitch.
Fix steps
- Verify the model tag reads GDT665SSNSS — Open the door and look on the inner door edge or left/right side of the tub opening.
- Reset PF1: unplug the dishwasher or switch off the breaker for 5 minutes, then restore power.
- Remove and clean the tub filter, confirm the inlet valve screen is clear, and check the door gasket before assuming a pump or valve failure for PF1.
- Cross-check part fit with GDT665SSNSS before ordering — use the model-specific parts diagram.
- Run a test cycle after repair. If the code returns, use the compatible parts below or the full brand code guide.
Guided repair checklist
Complete the safe checks one at a time. Progress is saved for this browser so you can continue later.
0 of 5 checks recorded
Recommended next action
Start with this check before considering replacement parts.
Check 1 of 5
Verify the model tag reads GDT665SSNSS — Open the door and look on the inner door edge or left/right side of the tub opening.
Did the repair resolve the issue?
Restoring repair progress…
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FAQ
What does PF1 mean on a GE GDT665SSNSS?
Power failure (often shown as PF) — select a cycle and press Start to resume.
How do I reset PF1 on a GDT665SSNSS?
Unplug the dishwasher or switch it off at the breaker for 5 minutes, then restore power and restart. If PF1 returns on the GDT665SSNSS, the underlying fault is still present.
What part do I need for GDT665SSNSS PF1?
Try the reset and troubleshooting steps first. PF1 on the GDT665SSNSS is not always a failed part.
Is PF1 on the GDT665SSNSS easy to fix?
Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.