GFW550SSNWW E3 error
Your GE GFW550SSNWW is showing E3. Before replacing parts, confirm the model tag matches GFW550SSNWW: Open the door and check the rim or door frame; the silver sticker is also on the rear panel near the top. On this GE washer, E3 means Pressure switch or water level error. The steps below follow the field-service order for the GFW550SSNWW platform — not the generic GE E3 page. Parts listed below are confirmed compatible with GFW550SSNWW. If the code cleared after a reset but returned mid-cycle, treat that as a confirmed fault rather than a one-time glitch.
Buy the replacement part
MPN: WH13X10024
$29.99
Fix steps
- Verify the model tag reads GFW550SSNWW — Open the door and check the rim or door frame; the silver sticker is also on the rear panel near the top.
- Reset E3: unplug the washer or switch off the breaker for 5 minutes, then restore power.
- Check inlet hoses, drain hose routing, and the door seal for obstructions or leaks before assuming an internal component failed for E3.
- Parts listed below are confirmed compatible with GFW550SSNWW.
- Run a test cycle after repair. If the code returns, use the compatible parts below or the full brand code guide.
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FAQ
What does E3 mean on a GE GFW550SSNWW?
Pressure switch or water level error.
How do I reset E3 on a GFW550SSNWW?
Unplug the washer or switch it off at the breaker for 5 minutes, then restore power and restart. If E3 returns on the GFW550SSNWW, the underlying fault is still present.
What part do I need for GFW550SSNWW E3?
Start with the GFW550SSNWW-compatible parts listed below. E3 often points to a failed component on this GE washer.
Is E3 on the GFW550SSNWW easy to fix?
Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.