796.41373210 F02 error
Your Kenmore 796.41373210 is showing F02. Before replacing parts, confirm the model tag matches 796.41373210: Open the door and check the rim or door frame; the silver sticker is also on the rear panel near the top. On this Kenmore washer, F02 means Keypad or control board fault. The steps below follow the field-service order for the 796.41373210 platform — not the generic Kenmore F02 page. Parts listed below are confirmed compatible with 796.41373210. If the code cleared after a reset but returned mid-cycle, treat that as a confirmed fault rather than a one-time glitch.
Buy the replacement part
MPN: W10189966
$149.99
Fix steps
- Verify the model tag reads 796.41373210 — Open the door and check the rim or door frame; the silver sticker is also on the rear panel near the top.
- Reset F02: unplug the washer or switch off the breaker for 5 minutes, then restore power.
- Check inlet hoses, drain hose routing, and the door seal for obstructions or leaks before assuming an internal component failed for F02.
- Parts listed below are confirmed compatible with 796.41373210.
- Run a test cycle after repair. If the code returns, use the compatible parts below or the full brand code guide.
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FAQ
What does F02 mean on a Kenmore 796.41373210?
Keypad or control board fault.
How do I reset F02 on a 796.41373210?
Unplug the washer or switch it off at the breaker for 5 minutes, then restore power and restart. If F02 returns on the 796.41373210, the underlying fault is still present.
What part do I need for 796.41373210 F02?
Start with the 796.41373210-compatible parts listed below. F02 often points to a failed component on this Kenmore washer.
Is F02 on the 796.41373210 easy to fix?
Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.