FixApplianceCode logo — appliance error code lookup and repair guidesFixApplianceCode

KFW410CSPZ F2E1 error

Your KitchenAid KFW410CSPZ is showing F2E1. Before replacing parts, confirm the model tag matches KFW410CSPZ: Open the door and check the rim or door frame; the silver sticker is also on the rear panel near the top. On this KitchenAid washer, F2E1 means Stuck key on user interface. The steps below follow the field-service order for the KFW410CSPZ platform — not the generic KitchenAid F2E1 page. Cross-check part fit with KFW410CSPZ before ordering — use the model-specific parts diagram. If the code cleared after a reset but returned mid-cycle, treat that as a confirmed fault rather than a one-time glitch.

Buy the replacement part

Washer Main Control Board
Washer Main Control Board

MPN: W10189966

$149.99

Buy on AmazonView part details

Fix steps

  1. Verify the model tag reads KFW410CSPZ — Open the door and check the rim or door frame; the silver sticker is also on the rear panel near the top.
  2. Reset F2E1: unplug the washer or switch off the breaker for 5 minutes, then restore power.
  3. Check inlet hoses, drain hose routing, and the door seal for obstructions or leaks before assuming an internal component failed for F2E1.
  4. Cross-check part fit with KFW410CSPZ before ordering — use the model-specific parts diagram.
  5. Run a test cycle after repair. If the code returns, use the compatible parts below or the full brand code guide.

Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer

FAQ

What does F2E1 mean on a KitchenAid KFW410CSPZ?

Stuck key on user interface.

How do I reset F2E1 on a KFW410CSPZ?

Unplug the washer or switch it off at the breaker for 5 minutes, then restore power and restart. If F2E1 returns on the KFW410CSPZ, the underlying fault is still present.

What part do I need for KFW410CSPZ F2E1?

Start with the KFW410CSPZ-compatible parts listed below. F2E1 often points to a failed component on this KitchenAid washer.

Is F2E1 on the KFW410CSPZ easy to fix?

Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.

See general KitchenAid F2E1 guide →