KFW410CSPZ F6E4 error
Your KitchenAid KFW410CSPZ is showing F6E4. Before replacing parts, confirm the model tag matches KFW410CSPZ: Open the door and check the rim or door frame; the silver sticker is also on the rear panel near the top. On this KitchenAid washer, F6E4 means Motor control fault. The steps below follow the field-service order for the KFW410CSPZ platform — not the generic KitchenAid F6E4 page. Parts listed below are confirmed compatible with KFW410CSPZ. If the code cleared after a reset but returned mid-cycle, treat that as a confirmed fault rather than a one-time glitch.
Buy the replacement part
MPN: W10913953
$39.99
Fix steps
- Verify the model tag reads KFW410CSPZ — Open the door and check the rim or door frame; the silver sticker is also on the rear panel near the top.
- Reset F6E4: unplug the washer or switch off the breaker for 5 minutes, then restore power.
- Check inlet hoses, drain hose routing, and the door seal for obstructions or leaks before assuming an internal component failed for F6E4.
- Parts listed below are confirmed compatible with KFW410CSPZ.
- Run a test cycle after repair. If the code returns, use the compatible parts below or the full brand code guide.
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FAQ
What does F6E4 mean on a KitchenAid KFW410CSPZ?
Motor control fault.
How do I reset F6E4 on a KFW410CSPZ?
Unplug the washer or switch it off at the breaker for 5 minutes, then restore power and restart. If F6E4 returns on the KFW410CSPZ, the underlying fault is still present.
What part do I need for KFW410CSPZ F6E4?
Start with the KFW410CSPZ-compatible parts listed below. F6E4 often points to a failed component on this KitchenAid washer.
Is F6E4 on the KFW410CSPZ easy to fix?
Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.