MDB4949SKZ F7E2 error
Your Maytag MDB4949SKZ is showing F7E2. Before replacing parts, confirm the model tag matches MDB4949SKZ: Open the door and look on the inner door edge or left/right side of the tub opening. On this Maytag dishwasher, F7E2 means Wash motor error — the circulation pump is not running. The steps below follow the field-service order for the MDB4949SKZ platform — not the generic Maytag F7E2 page. Parts listed below are confirmed compatible with MDB4949SKZ. If the code cleared after a reset but returned mid-cycle, treat that as a confirmed fault rather than a one-time glitch.
Buy the replacement part
Fix steps
- Verify the model tag reads MDB4949SKZ — Open the door and look on the inner door edge or left/right side of the tub opening.
- Reset F7E2: unplug the dishwasher or switch off the breaker for 5 minutes, then restore power.
- Remove and clean the tub filter, confirm the inlet valve screen is clear, and check the door gasket before assuming a pump or valve failure for F7E2.
- Parts listed below are confirmed compatible with MDB4949SKZ.
- Run a test cycle after repair. If the code returns, use the compatible parts below or the full brand code guide.
Professional assistance recommended
This issue may be unsafe for DIY repair. Follow the safety guidance above and contact a qualified technician.
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FAQ
What does F7E2 mean on a Maytag MDB4949SKZ?
Wash motor error — the circulation pump is not running.
How do I reset F7E2 on a MDB4949SKZ?
Unplug the dishwasher or switch it off at the breaker for 5 minutes, then restore power and restart. If F7E2 returns on the MDB4949SKZ, the underlying fault is still present.
What part do I need for MDB4949SKZ F7E2?
Start with the MDB4949SKZ-compatible parts listed below. F7E2 often points to a failed component on this Maytag dishwasher.
Is F7E2 on the MDB4949SKZ easy to fix?
Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.