MDB4949SKZ F9E1 error
Your Maytag MDB4949SKZ is showing F9E1. Before replacing parts, confirm the model tag matches MDB4949SKZ: Open the door and look on the inner door edge or left/right side of the tub opening. On this Maytag dishwasher, F9E1 means Long drain — the dishwasher is not emptying. Clean the filter and check the drain hose, disposer knockout, and air gap. The steps below follow the field-service order for the MDB4949SKZ platform — not the generic Maytag F9E1 page. Cross-check part fit with MDB4949SKZ before ordering — use the model-specific parts diagram. If the code cleared after a reset but returned mid-cycle, treat that as a confirmed fault rather than a one-time glitch.
Fix steps
- Verify the model tag reads MDB4949SKZ — Open the door and look on the inner door edge or left/right side of the tub opening.
- Reset F9E1: unplug the dishwasher or switch off the breaker for 5 minutes, then restore power.
- Remove and clean the tub filter, confirm the inlet valve screen is clear, and check the door gasket before assuming a pump or valve failure for F9E1.
- Cross-check part fit with MDB4949SKZ before ordering — use the model-specific parts diagram.
- Run a test cycle after repair. If the code returns, use the compatible parts below or the full brand code guide.
Professional assistance recommended
This issue may be unsafe for DIY repair. Follow the safety guidance above and contact a qualified technician.
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FAQ
What does F9E1 mean on a Maytag MDB4949SKZ?
Long drain — the dishwasher is not emptying. Clean the filter and check the drain hose, disposer knockout, and air gap.
How do I reset F9E1 on a MDB4949SKZ?
Unplug the dishwasher or switch it off at the breaker for 5 minutes, then restore power and restart. If F9E1 returns on the MDB4949SKZ, the underlying fault is still present.
What part do I need for MDB4949SKZ F9E1?
Try the reset and troubleshooting steps first. F9E1 on the MDB4949SKZ is not always a failed part.
Is F9E1 on the MDB4949SKZ easy to fix?
Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.