MED7230HW PF error
If your Maytag MED7230HW is showing error code PF, here's what it means for this specific model: Power failure — the drying cycle was interrupted. Hold Start to resume. Follow the steps below to reset the code, troubleshoot, and find compatible replacement parts.
Fix steps
- Confirm your model is MED7230HW (check the model tag).
- Reset PF on the MED7230HW: unplug or switch off the dryer for 5 minutes, then restore power.
- Power failure — the drying cycle was interrupted. Hold Start to resume.
- Follow the part recommendations below that are compatible with your model.
- Run a test cycle after repair to confirm the code is cleared.
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FAQ
What does PF mean on a Maytag MED7230HW?
Power failure — the drying cycle was interrupted. Hold Start to resume.
How do I reset PF on a MED7230HW?
Unplug the dryer or switch it off at the breaker for 5 minutes, then restore power and restart. If PF returns on the MED7230HW, the underlying fault is still present.
What part do I need for MED7230HW PF?
Try the reset and troubleshooting steps first. PF on the MED7230HW is not always a failed part.
Is PF on the MED7230HW easy to fix?
Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.