MVW7232HW F5E2 error
Your Maytag MVW7232HW is showing F5E2. Before replacing parts, confirm the model tag matches MVW7232HW: Open the door and check the rim or door frame; the silver sticker is also on the rear panel near the top. On this Maytag washer, F5E2 means Door lock failure. The steps below follow the field-service order for the MVW7232HW platform — not the generic Maytag F5E2 page. Parts listed below are confirmed compatible with MVW7232HW. If the code cleared after a reset but returned mid-cycle, treat that as a confirmed fault rather than a one-time glitch.
Buy the replacement part
MPN: W10404050
$28.99
Fix steps
- Verify the model tag reads MVW7232HW — Open the door and check the rim or door frame; the silver sticker is also on the rear panel near the top.
- Reset F5E2: unplug the washer or switch off the breaker for 5 minutes, then restore power.
- Check inlet hoses, drain hose routing, and the door seal for obstructions or leaks before assuming an internal component failed for F5E2.
- Parts listed below are confirmed compatible with MVW7232HW.
- Run a test cycle after repair. If the code returns, use the compatible parts below or the full brand code guide.
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FAQ
What does F5E2 mean on a Maytag MVW7232HW?
Door lock failure.
How do I reset F5E2 on a MVW7232HW?
Unplug the washer or switch it off at the breaker for 5 minutes, then restore power and restart. If F5E2 returns on the MVW7232HW, the underlying fault is still present.
What part do I need for MVW7232HW F5E2?
Start with the MVW7232HW-compatible parts listed below. F5E2 often points to a failed component on this Maytag washer.
Is F5E2 on the MVW7232HW easy to fix?
Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.