MVW7232HW F7E5 error
Your Maytag MVW7232HW is showing F7E5. Before replacing parts, confirm the model tag matches MVW7232HW: Open the door and check the rim or door frame; the silver sticker is also on the rear panel near the top. On this Maytag washer, F7E5 means Shifter motor fault. The steps below follow the field-service order for the MVW7232HW platform — not the generic Maytag F7E5 page. Parts listed below are confirmed compatible with MVW7232HW. If the code cleared after a reset but returned mid-cycle, treat that as a confirmed fault rather than a one-time glitch.
Buy the replacement part
MPN: W10913953
$39.99
Fix steps
- Verify the model tag reads MVW7232HW — Open the door and check the rim or door frame; the silver sticker is also on the rear panel near the top.
- Reset F7E5: unplug the washer or switch off the breaker for 5 minutes, then restore power.
- Check inlet hoses, drain hose routing, and the door seal for obstructions or leaks before assuming an internal component failed for F7E5.
- Parts listed below are confirmed compatible with MVW7232HW.
- Run a test cycle after repair. If the code returns, use the compatible parts below or the full brand code guide.
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FAQ
What does F7E5 mean on a Maytag MVW7232HW?
Shifter motor fault.
How do I reset F7E5 on a MVW7232HW?
Unplug the washer or switch it off at the breaker for 5 minutes, then restore power and restart. If F7E5 returns on the MVW7232HW, the underlying fault is still present.
What part do I need for MVW7232HW F7E5?
Start with the MVW7232HW-compatible parts listed below. F7E5 often points to a failed component on this Maytag washer.
Is F7E5 on the MVW7232HW easy to fix?
Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.