DW80R5060US 4E error
Your Samsung DW80R5060US is showing 4E. Before replacing parts, confirm the model tag matches DW80R5060US: Open the door and look on the inner door edge or left/right side of the tub opening. On this Samsung dishwasher, 4E means Water supply error — the dishwasher is not getting water at the pressure or temperature it needs. The steps below follow the field-service order for the DW80R5060US platform — not the generic Samsung 4E page. Cross-check part fit with DW80R5060US before ordering — use the model-specific parts diagram. If the code cleared after a reset but returned mid-cycle, treat that as a confirmed fault rather than a one-time glitch.
Parts for this repair
We don't yet have a verified exact part number for this model. Search for a compatible water inlet valve.
Check current price & availability
FixApplianceCode may earn a commission from qualifying purchases.
Fix steps
- Verify the model tag reads DW80R5060US — Open the door and look on the inner door edge or left/right side of the tub opening.
- Reset 4E: unplug the dishwasher or switch off the breaker for 5 minutes, then restore power.
- Remove and clean the tub filter, confirm the inlet valve screen is clear, and check the door gasket before assuming a pump or valve failure for 4E.
- Cross-check part fit with DW80R5060US before ordering — use the model-specific parts diagram.
- Run a test cycle after repair. If the code returns, use the compatible parts below or the full brand code guide.
Guided repair checklist
Complete the safe checks one at a time. Progress is saved for this browser so you can continue later.
0 of 5 checks recorded
Recommended next action
Start with this check before considering replacement parts.
Check 1 of 5
Verify the model tag reads DW80R5060US — Open the door and look on the inner door edge or left/right side of the tub opening.
Did the repair resolve the issue?
Restoring repair progress…
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FAQ
What does 4E mean on a Samsung DW80R5060US?
Water supply error — the dishwasher is not getting water at the pressure or temperature it needs.
How do I reset 4E on a DW80R5060US?
Unplug the dishwasher or switch it off at the breaker for 5 minutes, then restore power and restart. If 4E returns on the DW80R5060US, the underlying fault is still present.
What part do I need for DW80R5060US 4E?
Try the reset and troubleshooting steps first. 4E on the DW80R5060US is not always a failed part.
Is 4E on the DW80R5060US easy to fix?
Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.