RF28R7351SG 14E error
Your Samsung RF28R7351SG is showing 14E. Before replacing parts, confirm the model tag matches RF28R7351SG: Inside the fridge on the upper-left wall, or on the ceiling of the fresh-food section. On this Samsung refrigerator, 14E means Ice maker sensor error — the ice maker temperature reading is out of range. The steps below follow the field-service order for the RF28R7351SG platform — not the generic Samsung 14E page. Parts listed below are confirmed compatible with RF28R7351SG. If the code cleared after a reset but returned mid-cycle, treat that as a confirmed fault rather than a one-time glitch.
Buy the replacement part
MPN: DA97-15217D
$109.99
Fix steps
- Verify the model tag reads RF28R7351SG — Inside the fridge on the upper-left wall, or on the ceiling of the fresh-food section.
- Reset 14E: unplug the refrigerator or switch off the breaker for 5 minutes, then restore power.
- Inspect door gaskets, condenser coils, and listen for the evaporator fan when the compressor runs — heavy frost on the freezer back wall points to defrost failure before ordering a fan motor for 14E.
- Parts listed below are confirmed compatible with RF28R7351SG.
- Run a test cycle after repair. If the code returns, use the compatible parts below or the full brand code guide.
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FAQ
What does 14E mean on a Samsung RF28R7351SG?
Ice maker sensor error — the ice maker temperature reading is out of range.
How do I reset 14E on a RF28R7351SG?
Unplug the refrigerator or switch it off at the breaker for 5 minutes, then restore power and restart. If 14E returns on the RF28R7351SG, the underlying fault is still present.
What part do I need for RF28R7351SG 14E?
Start with the RF28R7351SG-compatible parts listed below. 14E often points to a failed component on this Samsung refrigerator.
Is 14E on the RF28R7351SG easy to fix?
Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.