WF45R6100AW 4C error
Your Samsung WF45R6100AW is showing 4C. Before replacing parts, confirm the model tag matches WF45R6100AW: Open the door — the tag is on the door frame or inner rim; also on the rear upper-left panel. Coin filter access is behind the lower front panel on this platform. On this Samsung washer, 4C means Water supply issue — washer not filling properly. The steps below follow the field-service order for the WF45R6100AW platform — not the generic Samsung 4C page. Parts listed below are confirmed compatible with WF45R6100AW. If the code cleared after a reset but returned mid-cycle, treat that as a confirmed fault rather than a one-time glitch.
Buy the replacement part
MPN: DC62-00214K
$34.99
MPN: DC31-00054A
$35.99
MPN: W10810403
$34.99
Fix steps
- Verify the model tag reads WF45R6100AW — Open the door — the tag is on the door frame or inner rim; also on the rear upper-left panel.
- Reset 4C: unplug the washer or switch off the breaker for 5 minutes, then restore power.
- Check inlet hoses, drain hose routing, and the door seal for obstructions or leaks before assuming an internal component failed for 4C.
- Model note for WF45R6100AW: Coin filter access is behind the lower front panel on this platform.
- Run a test cycle after repair. If the code returns, use the compatible parts below or the full brand code guide.
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FAQ
What does 4C mean on a Samsung WF45R6100AW?
Water supply issue — washer not filling properly.
How do I reset 4C on a WF45R6100AW?
Unplug the washer or switch it off at the breaker for 5 minutes, then restore power and restart. If 4C returns on the WF45R6100AW, the underlying fault is still present.
What part do I need for WF45R6100AW 4C?
Start with the WF45R6100AW-compatible parts listed below. 4C often points to a failed component on this Samsung washer.
Is 4C on the WF45R6100AW easy to fix?
Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.