WED4815EW F23 error
Your Whirlpool WED4815EW is showing F23. Before replacing parts, confirm the model tag matches WED4815EW: Check the door frame, inside the door opening, or the rear panel near the exhaust. On this Whirlpool dryer, F23 means Exhaust thermistor shorted — the dryer cannot read exhaust temperature safely. The steps below follow the field-service order for the WED4815EW platform — not the generic Whirlpool F23 page. Parts listed below are confirmed compatible with WED4815EW. If the code cleared after a reset but returned mid-cycle, treat that as a confirmed fault rather than a one-time glitch.
Buy the replacement part
Fix steps
- Verify the model tag reads WED4815EW — Check the door frame, inside the door opening, or the rear panel near the exhaust.
- Reset F23: unplug the dryer or switch off the breaker for 5 minutes, then restore power.
- Clean the lint screen, inspect the exhaust hose and exterior vent hood, and confirm electric dryers have both legs of 240V power for F23.
- Parts listed below are confirmed compatible with WED4815EW.
- Run a test cycle after repair. If the code returns, use the compatible parts below or the full brand code guide.
Professional assistance recommended
This issue may be unsafe for DIY repair. Follow the safety guidance above and contact a qualified technician.
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FAQ
What does F23 mean on a Whirlpool WED4815EW?
Exhaust thermistor shorted — the dryer cannot read exhaust temperature safely.
How do I reset F23 on a WED4815EW?
Unplug the dryer or switch it off at the breaker for 5 minutes, then restore power and restart. If F23 returns on the WED4815EW, the underlying fault is still present.
What part do I need for WED4815EW F23?
Start with the WED4815EW-compatible parts listed below. F23 often points to a failed component on this Whirlpool dryer.
Is F23 on the WED4815EW easy to fix?
Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.