WFW6620HC F60 error
Your Whirlpool WFW6620HC is showing F60. Before replacing parts, confirm the model tag matches WFW6620HC: Open the door and check the rim or door frame; the silver sticker is also on the rear panel near the top. On this Whirlpool washer, F60 means Drive motor speed sensing fault — the washer cannot confirm drum speed. The steps below follow the field-service order for the WFW6620HC platform — not the generic Whirlpool F60 page. Cross-check part fit with WFW6620HC before ordering — use the model-specific parts diagram. If the code cleared after a reset but returned mid-cycle, treat that as a confirmed fault rather than a one-time glitch.
Buy the replacement part
Fix steps
- Verify the model tag reads WFW6620HC — Open the door and check the rim or door frame; the silver sticker is also on the rear panel near the top.
- Reset F60: unplug the washer or switch off the breaker for 5 minutes, then restore power.
- Check inlet hoses, drain hose routing, and the door seal for obstructions or leaks before assuming an internal component failed for F60.
- Cross-check part fit with WFW6620HC before ordering — use the model-specific parts diagram.
- Run a test cycle after repair. If the code returns, use the compatible parts below or the full brand code guide.
Guided repair checklist
Complete the safe checks one at a time. Progress is saved for this browser so you can continue later.
0 of 5 checks recorded
Recommended next action
Start with this check before considering replacement parts.
Check 1 of 5
Verify the model tag reads WFW6620HC — Open the door and check the rim or door frame; the silver sticker is also on the rear panel near the top.
Did the repair resolve the issue?
Restoring repair progress…
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FAQ
What does F60 mean on a Whirlpool WFW6620HC?
Drive motor speed sensing fault — the washer cannot confirm drum speed.
How do I reset F60 on a WFW6620HC?
Unplug the washer or switch it off at the breaker for 5 minutes, then restore power and restart. If F60 returns on the WFW6620HC, the underlying fault is still present.
What part do I need for WFW6620HC F60?
Start with the WFW6620HC-compatible parts listed below. F60 often points to a failed component on this Whirlpool washer.
Is F60 on the WFW6620HC easy to fix?
Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.