Samsung oven bAd LinE
The power connection is wrong. Check the cord before a new board.
- Oven / Range
- Check power
- Turn the breaker off
Samsung oven or range bAd LinE means the power connection is not wired or plugged in correctly. The control is saying the supply at the cord or terminal block is wrong, not that a bake element has failed. Turn the breaker off before you touch the cord. Confirm the plug is fully seated, or that a hard-wired range has the cord lugs tight on the terminal block. Restore power only after the connections are correct. Replace a control board only if bAd LinE returns with a solid power connection.
Reviewed August 2025 · sources below
Safe to keep using?
Safe for limited use
No immediate safety hazard detected, but monitor during use.
- • Monitor the appliance during use and stop if symptoms worsen.
Next step
Still seeing BADLINE?
Show a photo or describe the symptom. Answer a few safety-first questions and see whether a part is needed.
Free guided checks · No account required · Don’t open live electrical, gas, or refrigerant equipment
How to fix BADLINE
- Turn off the breaker for the range before you inspect the cord or terminal block.
- If the range is plugged in, confirm the plug is fully seated in the outlet.
- If it is hard-wired, check that the cord wires are tight on the terminal block and matched to the house wiring.
- Turn the breaker back on and see if bAd LinE clears.
- If the code returns and the connections are tight, the power supply or control needs a technician.
Call a pro when: Call an electrician if the outlet or terminal block is burned, or a technician if bAd LinE stays after the connections are tight.
What BADLINE means
Power connection is not wired or plugged in correctly.
Likely causes
Many codes resolve with cleaning, resetting, or reconnecting.
Check: Power-cycle the appliance and check for obvious blockages or loose connections.
Est. cost: $0–$0
Wear or electrical failure of an internal part.
Check: If basic checks fail, the faulty component likely needs replacement.
Est. cost: $0–$100
Guided repair checklist
Complete the safe checks one at a time. Progress is saved for this browser so you can continue later.
0 of 5 checks recorded
Recommended next action
Start with this check before considering replacement parts.
Check 1 of 5
Turn off the breaker for the range before you inspect the cord or terminal block.
Did the repair resolve the issue?
Restoring repair progress…
Questions about BADLINE
What does bAd LinE mean on a Samsung oven?
bAd LinE means the power connection is not wired or plugged in correctly.
How do I fix Samsung bAd LinE?
With the breaker off, reseat the plug or tighten the terminal-block connections, then restore power.
Do I need a part for bAd LinE?
Start with the cord and outlet. A board is not the first fix for a bad power connection.
Other Samsung Oven / Range codes
Prevent this problem next time
- Follow manufacturer maintenance schedule
- Address small issues before they worsen
Sources
Manufacturer meaning
Power connection is not wired or plugged in correctly.
FixApplianceCode guidance
Start with basic checks for Samsung BADLINE before ordering parts.
Source type: Part database
Source: ModelPartFinder + FixApplianceCode editorial
Last reviewed: 2026-10-24
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
As an Amazon Associate I earn from qualifying purchases. Some links may also earn other retailer commissions, at no additional cost to you. Affiliate disclosure