Samsung Washer OE error code
Washer
Reviewed August 2025 · sources below
On Samsung washers, error OE indicates: Overflow or drain problem detected. Start with a 5-minute power reset at the breaker, then follow the washer-specific checks below before ordering replacement parts for OE. If the code returns on two consecutive cycles after a reset, treat it as a confirmed fault — not a one-time power glitch.
Buy the replacement part
MPN: DC31-00054A
$35.99
Safe to keep using?
Use caution
This issue may worsen during use — limit operation and address promptly.
- • Turn off the water supply before disconnecting hoses.
2 product recalls may apply
Brand-level matches — verify your model.
Show
2 product recalls may apply
Brand-level matches — verify your model.
Likely causes
Many codes resolve with cleaning, resetting, or reconnecting.
Check: Power-cycle the appliance and check for obvious blockages or loose connections.
Est. cost: $0–$0
Wear or electrical failure of an internal part.
Check: If basic checks fail, the faulty component likely needs replacement.
Est. cost: $0–$75
What it means
Overflow or drain problem detected.
How to fix it
- Unplug the washer or turn off power at the breaker before inspecting any components.
- Reset Samsung OE: leave power off for 5 minutes, restore power, then restart. Confirm whether OE returns.
- Check the most common cause for OE: Overflow or drain problem detected.
- Inspect hoses, connections, and visible wiring for damage, clogs, or loose fittings.
- If a reset and basic checks don't clear the code, the fix often requires a replacement part (see recommended parts below).
- Reassemble, restore power, and run a test cycle. If OE returns, the faulty component likely needs replacement.
Call a pro when: Call a technician if you smell burning, see sparking, hear grinding from the motor, or the code returns after replacing the suspected part.
FAQ
What does OE error code mean on a Samsung washer?
Overflow or drain problem detected.
How do I reset Samsung washer OE?
Unplug the washer or switch it off at the breaker for 5 minutes, then restore power and restart. A reset clears a stored OE after a glitch, but the code will return if the underlying fault is still present.
What part do I need for Samsung OE?
Often yes — error OE frequently points to a failed component. Check the recommended parts below for direct replacements.
Can I fix Samsung error OE myself?
Many OE errors can be fixed DIY if you're comfortable with basic tools. Start with the reset and steps above. If the issue involves electrical components or the code returns after replacing parts, call a professional.
Samsung OE on specific models
Other Samsung Washer codes
Prevent this problem next time
- Follow manufacturer maintenance schedule
- Address small issues before they worsen
Sources
Manufacturer meaning
Overflow or drain problem detected.
FixApplianceCode guidance
Start with basic checks for Samsung OE before ordering parts.
Source type: Part database
Source: ModelPartFinder + FixApplianceCode editorial
Last reviewed: 2026-09-22
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FixApplianceCode may earn a commission when you purchase through qualifying links, at no additional cost to you. Affiliate disclosure