Samsung Dishwasher tE error code
Dishwasher
Samsung dishwasher error code tE means: Temperature sensor error (often shown as tE) — the dishwasher cannot read water temperature. Some displays show this as tE or tC. This guide covers how to reset the code, the most common causes, step-by-step troubleshooting, and replacement parts that typically resolve tE.
Safe to keep using?
Stop using
No immediate safety hazard detected, but monitor during use.
- • Unplug the appliance before inspection.
- • Do not continue using the appliance until the cause is identified.
Likely causes
Many codes resolve with cleaning, resetting, or reconnecting.
Check: Power-cycle the appliance and check for obvious blockages or loose connections.
Est. cost: $0–$0
Wear or electrical failure of an internal part.
Check: If basic checks fail, the faulty component likely needs replacement.
Est. cost: $0–$75
What it means
Temperature sensor error (often shown as tE) — the dishwasher cannot read water temperature.
How to fix it
- Unplug the dishwasher or turn off power at the breaker before inspecting any components.
- Reset Samsung tE: leave power off for 5 minutes, restore power, then restart. Confirm whether tE returns.
- Check the most common cause for tE: Temperature sensor error (often shown as tE) — the dishwasher cannot read water temperature.
- Inspect hoses, connections, and visible wiring for damage, clogs, or loose fittings.
- If a reset and basic checks don't clear the code, use our lookup tool for AI-powered diagnosis or contact a qualified technician.
- Reassemble, restore power, and run a test cycle. If tE returns, the faulty component likely needs replacement.
Call a pro when: Call a technician if you smell burning, see sparking, hear grinding from the motor, or the code returns after replacing the suspected part.
Repair videos
FAQ
What does tE error code mean on a Samsung dishwasher?
Temperature sensor error (often shown as tE) — the dishwasher cannot read water temperature.
What does Samsung tE mean?
Temperature sensor error (often shown as tE) — the dishwasher cannot read water temperature.
How do I reset Samsung dishwasher tE?
Unplug the dishwasher or switch it off at the breaker for 5 minutes, then restore power and restart. A reset clears a stored tE after a glitch, but the code will return if the underlying fault is still present.
What part do I need for Samsung tE?
Not always — some tE errors are caused by user-fixable issues like clogs or unbalanced loads. Try the troubleshooting steps first.
Can I fix Samsung error tE myself?
Many tE errors can be fixed DIY if you're comfortable with basic tools. Start with the reset and steps above. If the issue involves electrical components or the code returns after replacing parts, call a professional.
Do I need a replacement part for tE1?
Not always — some tE errors are caused by user-fixable issues like clogs or unbalanced loads. Try the troubleshooting steps first.
Other Samsung Dishwasher codes
Prevent this problem next time
- Follow manufacturer maintenance schedule
- Address small issues before they worsen
Sources
Manufacturer meaning
Temperature sensor error (often shown as tE) — the dishwasher cannot read water temperature.
FixApplianceCode guidance
Start with basic checks for Samsung tE1 before ordering parts.
Source type: Part database
Source: ModelPartFinder + FixApplianceCode editorial
Last reviewed: 2026-08-24
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FixApplianceCode may earn a commission when you purchase through qualifying links, at no additional cost to you. Affiliate disclosure