FixApplianceCode logo — appliance error code lookup and repair guidesFixApplianceCode

Whirlpool Cooktop F1E0 error code

Cooktop

Whirlpool cooktop error code F1E0 means: Cooktop control or stuck-key fault (often shown as F1E0). Clean the glass, then reset the breaker. Some displays show this as F1E0 or F1 E0. This guide covers how to reset the code, the most common causes, step-by-step troubleshooting, and replacement parts that typically resolve F1E0.

Safe to keep using?

Stop using

No immediate safety hazard detected, but monitor during use.

  • • Unplug the appliance before inspection.
  • • Do not continue using the appliance until the cause is identified.

1 product recall may apply

Brand-level matches — verify your model.

Show

  • Whirlpool Recalls Glass Cooktops with Touch Controls Due to Burn and Fire Hazards

    Aug 2019 · Confirm your model

    Notice
DIY Difficulty
1 /10EASY

This is a straightforward homeowner task with basic tools and low risk.

Time: 15–30 minutes
Risk: Low
Skill: Beginner
Tools: Screwdriver, Adjustable pliers, Flashlight

Likely causes

Most likelyUser-serviceable issue

Many codes resolve with cleaning, resetting, or reconnecting.

Check: Power-cycle the appliance and check for obvious blockages or loose connections.

Est. cost: $0–$0

PossibleFailed component

Wear or electrical failure of an internal part.

Check: If basic checks fail, the faulty component likely needs replacement.

Est. cost: $0–$100

Repair or Replace?

DIY repair

$35–$65

Professional repair

$223–$302

Comparable replacement

$723–$977

Our recommendation

REPAIR LIKELY MAKES SENSE

REPAIR LIKELY MAKES SENSE. Professional repair ($223–$302) is well below replacement cost.

Actual repair and replacement costs vary by model, location, labor rate, and condition.

What it means

Cooktop control or stuck-key fault (often shown as F1E0). Clean the glass, then reset the breaker.

How to fix it

  1. Unplug the cooktop or turn off power at the breaker before inspecting any components.
  2. Reset Whirlpool F1E0: leave power off for 5 minutes, restore power, then restart. Confirm whether F1E0 returns.
  3. Check the most common cause for F1E0: Cooktop control or stuck-key fault (often shown as F1E0). Clean the glass, then reset the breaker.
  4. Wipe the glass dry, move pans off the controls, and confirm the cookware is induction-ready and centered if the zone is induction.
  5. If a reset and basic checks don't clear the code, use our lookup tool for AI-powered diagnosis or contact a qualified technician.
  6. Reassemble, restore power, and run a test cycle. If F1E0 returns, the faulty component likely needs replacement.

Call a pro when: Call a technician if you smell burning, see sparking, hear grinding from the motor, or the code returns after replacing the suspected part.

Repair videos

Watch repair videos on YouTube

User manuals
Start with the official support page, then use the search options if that link has moved. You’ll usually need your model number.
OfficialWhirlpool manuals & literature

Search by model number for owner’s manuals and literature.

Manual librarySearch Whirlpool Cooktop manuals on ManualsLib

Free scanned manuals — search results, not a guaranteed match.

Web searchSearch the web for Whirlpool Cooktop user manual

Useful when manufacturer pages move or don’t list older models.

FAQ

What does F1E0 error code mean on a Whirlpool cooktop?

Cooktop control or stuck-key fault (often shown as F1E0). Clean the glass, then reset the breaker.

What does Whirlpool F1E0 mean?

Cooktop control or stuck-key fault (often shown as F1E0). Clean the glass, then reset the breaker.

How do I reset Whirlpool cooktop F1E0?

Unplug the cooktop or switch it off at the breaker for 5 minutes, then restore power and restart. A reset clears a stored F1E0 after a glitch, but the code will return if the underlying fault is still present.

What part do I need for Whirlpool F1E0?

Not always — some F1E0 errors are caused by user-fixable issues like clogs or unbalanced loads. Try the troubleshooting steps first.

Can I fix Whirlpool error F1E0 myself?

Many F1E0 errors can be fixed DIY if you're comfortable with basic tools. Start with the reset and steps above. If the issue involves electrical components or the code returns after replacing parts, call a professional.

Do I need a replacement part for F1E0C?

Not always — some F1E0 errors are caused by user-fixable issues like clogs or unbalanced loads. Try the troubleshooting steps first.

Whirlpool F1E0C on specific models

WCE55US0HB F1E0C

Prevent this problem next time

  • Follow manufacturer maintenance schedule
  • Address small issues before they worsen

Sources

Manufacturer meaning

Cooktop control or stuck-key fault (often shown as F1E0). Clean the glass, then reset the breaker.

FixApplianceCode guidance

Start with basic checks for Whirlpool F1E0C before ordering parts.

Source type: Part database

Source: ModelPartFinder + FixApplianceCode editorial

Last reviewed: 2026-08-24

Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer

FixApplianceCode may earn a commission when you purchase through qualifying links, at no additional cost to you. Affiliate disclosure

Get AI-powered fix steps for Whirlpool F1E0C →