LG dryer error codes
17 LG dryer error codes with meanings and fix steps. Open a code for the full diagnosis.
LG dryer error codes by model
- CLChild lock is enabled.
- d75Exhaust duct is about 75% restricted — lint or a crushed vent is slowing airflow.
- d80Exhaust duct is about 80% restricted — clothes take too long to dry.
- d90Exhaust duct is about 90% restricted — clean the lint filter and vent now.
- d95Exhaust duct is about 95% blocked — a fire and overheat risk until the vent is cleared.
- nPNo current detected at the heater — often a 240V outlet, breaker, or power-cord wiring issue.
- PSWrong voltage at the power cord — the white and red wires may be reversed on the terminal block.
- dEDoor error (often shown as dE) — the door is not fully closed, or the lint filter is not seated.
- FOLint filter is out — reinsert the filter before starting a cycle.
- HSHumidity sensor error — the dryer may run a very long cycle until the sensors are cleaned.
- PFPower failure — the last cycle was interrupted by a power loss.
- tE1Thermistor error — the dryer cannot read incoming air temperature.
- tE2Thermistor error during a steam cycle — extra humidity cooled the duct too fast.
- tE3Thermistor error — the dryer cannot read exhaust temperature.
- gASGas dryer is not receiving gas — check the supply valve and line.
- AddSteam feeder needs water — fill the drawer with tap water before a steam cycle.
- E13Hybrid condensing dryer drain hose is kinked, clogged, or frozen.
Looking for another appliance? All LG error codes · All dryer error codes