LG Dryer E13 error code
- Dryer
On LG dryers, error E13 indicates: Hybrid condensing dryer drain hose is kinked, clogged, or frozen. Start with a 5-minute power reset at the breaker, then follow the dryer-specific checks below before ordering replacement parts for E13. If the code returns on two consecutive cycles after a reset, treat it as a confirmed fault — not a one-time power glitch.
Reviewed August 2025 · sources below
Safe to keep using?
Use caution
This issue may worsen during use — limit operation and address promptly.
- • Turn off the water supply before disconnecting hoses.
Next step
Still seeing E13?
Show a photo or describe the symptom. Answer a few safety-first questions and see whether a part is needed.
Free guided checks · No account required · Don’t open live electrical, gas, or refrigerant equipment
How to fix E13
- Unplug the dryer or turn off power at the breaker before inspecting any components.
- Reset LG E13: leave power off for 5 minutes, restore power, then restart. Confirm whether E13 returns.
- Check the most common cause for E13: Hybrid condensing dryer drain hose is kinked, clogged, or frozen.
- Inspect hoses, connections, and visible wiring for damage, clogs, or loose fittings.
- If a reset and basic checks don't clear the code, use our lookup tool for AI-powered diagnosis or contact a qualified technician.
- Reassemble, restore power, and run a test cycle. If E13 returns, the faulty component likely needs replacement.
Call a pro when: Call a technician if you smell burning, see sparking, hear grinding from the motor, or the code returns after replacing the suspected part.
What E13 means
Hybrid condensing dryer drain hose is kinked, clogged, or frozen.
Likely causes
Many codes resolve with cleaning, resetting, or reconnecting.
Check: Power-cycle the appliance and check for obvious blockages or loose connections.
Est. cost: $0–$0
Wear or electrical failure of an internal part.
Check: If basic checks fail, the faulty component likely needs replacement.
Est. cost: $0–$100
Guided repair checklist
Complete the safe checks one at a time. Progress is saved for this browser so you can continue later.
0 of 6 checks recorded
Recommended next action
Start with this check before considering replacement parts.
Check 1 of 6
Unplug the dryer or turn off power at the breaker before inspecting any components.
Did the repair resolve the issue?
Restoring repair progress…
Questions about E13
What does E13 error code mean on a LG dryer?
Hybrid condensing dryer drain hose is kinked, clogged, or frozen.
How do I reset LG dryer E13?
Unplug the dryer or switch it off at the breaker for 5 minutes, then restore power and restart. A reset clears a stored E13 after a glitch, but the code will return if the underlying fault is still present.
What part do I need for LG E13?
Not always — some E13 errors are caused by user-fixable issues like clogs or unbalanced loads. Try the troubleshooting steps first.
Can I fix LG error E13 myself?
Many E13 errors can be fixed DIY if you're comfortable with basic tools. Start with the reset and steps above. If the issue involves electrical components or the code returns after replacing parts, call a professional.
Other LG Dryer codes
Prevent this problem next time
- Follow manufacturer maintenance schedule
- Address small issues before they worsen
Sources
Manufacturer meaning
Hybrid condensing dryer drain hose is kinked, clogged, or frozen.
FixApplianceCode guidance
Start with basic checks for LG E13 before ordering parts.
Source type: Part database
Source: ModelPartFinder + FixApplianceCode editorial
Last reviewed: 2026-10-23
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
As an Amazon Associate I earn from qualifying purchases. Some links may also earn other retailer commissions, at no additional cost to you. Affiliate disclosure