Frigidaire refrigerator CE error code
- Refrigerator
Frigidaire CE indicates a communication error between refrigerator control boards — the fresh-food UI may work while the freezer board does not respond. Loose harnesses at the freezer door hinge or moisture in the connector on FRSS2323/EI33AF models cause many CE codes before replacing a board.
Reviewed August 2025 · sources below
Safe to keep using?
Use caution
This issue may worsen during use — limit operation and address promptly.
Next step
Still seeing CE?
Show a photo or describe the symptom. Answer a few safety-first questions and see whether a part is needed.
Free guided checks · No account required · Don’t open live electrical, gas, or refrigerant equipment
How to fix CE
- Unplug the refrigerator and inspect the hinge harness between the freezer door and cabinet — reseat connectors.
- Check the main control board harness for loose or corroded pins.
- Leave doors open 5 minutes to dry any moisture at connectors after thawing.
- Restore power and monitor — CE may clear if the harness was loose.
- If CE persists, the main control or display board may need replacement per model-specific diagnostics.
Call a pro when: Call a technician if CE persists after harness reseat, you see burned pins, or multiple boards need replacement.
What CE means
Communication error between refrigerator control boards.
Likely causes
Many codes resolve with cleaning, resetting, or reconnecting.
Check: Power-cycle the appliance and check for obvious blockages or loose connections.
Est. cost: $0–$0
Wear or electrical failure of an internal part.
Check: If basic checks fail, the faulty component likely needs replacement.
Est. cost: $0–$100
Guided repair checklist
Complete the safe checks one at a time. Progress is saved for this browser so you can continue later.
0 of 5 checks recorded
Recommended next action
Start with this check before considering replacement parts.
Check 1 of 5
Unplug the refrigerator and inspect the hinge harness between the freezer door and cabinet — reseat connectors.
Did the repair resolve the issue?
Restoring repair progress…
Questions about CE
What does CE mean on a Frigidaire refrigerator?
CE is a communication fault between control boards — wiring or a failed board prevents them from talking.
How do I reset Frigidaire CE?
Reseat hinge and main board harnesses, power off 5 minutes, then restore. Moisture after thawing can trigger CE.
Do I need a new board for CE?
Try harness fixes first. Board replacement is common if CE returns immediately after reset.
Can a power surge cause CE?
Yes — surges can corrupt board communication. Try reset after checking harnesses.
Frigidaire CE on specific models
Other Frigidaire Refrigerator codes
Prevent this problem next time
- Follow manufacturer maintenance schedule
- Address small issues before they worsen
Sources
Manufacturer meaning
Communication error between refrigerator control boards.
FixApplianceCode guidance
Start with basic checks for Frigidaire CE before ordering parts.
Source type: Part database
Source: ModelPartFinder + FixApplianceCode editorial
Last reviewed: 2026-10-24
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
As an Amazon Associate I earn from qualifying purchases. Some links may also earn other retailer commissions, at no additional cost to you. Affiliate disclosure