Frigidaire Dishwasher E10 error code
Dishwasher
Reviewed August 2025 · sources below
On Frigidaire dishwashers, error E10 indicates: Water fill timeout. Start with a 5-minute power reset at the breaker, then follow the dishwasher-specific checks below before ordering replacement parts for E10. If the code returns on two consecutive cycles after a reset, treat it as a confirmed fault — not a one-time power glitch.
Buy the replacement part
MPN: 154637401
$39.99
Safe to keep using?
Safe for limited use
No immediate safety hazard detected, but monitor during use.
- • Monitor the appliance during use and stop if symptoms worsen.
1 product recall may apply
Brand-level matches — verify your model.
Show
1 product recall may apply
Brand-level matches — verify your model.
- Notice
Certain Sears Kenmore Dishwashers May Pose Fire Hazard
Feb 1993 · Confirm your model
Likely causes
The shutoff valve is closed, or the inlet hose is crushed behind the appliance.
Check: Confirm household water is on, fully open the supply valve, and straighten the inlet hose.
Est. cost: $0–$0
The valve solenoid can stick or fail after years of use, so the tub never fills.
Check: If the supply is open and the hose screen is clean, the water inlet valve likely needs replacement.
Est. cost: $25–$75
What it means
Water fill timeout.
How to fix it
- Unplug the dishwasher or turn off power at the breaker before inspecting any components.
- Reset Frigidaire E10: leave power off for 5 minutes, restore power, then restart. Confirm whether E10 returns.
- Check the most common cause for E10: Water fill timeout.
- Inspect hoses, connections, and visible wiring for damage, clogs, or loose fittings.
- If a reset and basic checks don't clear the code, the fix often requires a replacement part (see recommended parts below).
- Reassemble, restore power, and run a test cycle. If E10 returns, the faulty component likely needs replacement.
Call a pro when: Call a technician if you smell burning, see sparking, hear grinding from the motor, or the code returns after replacing the suspected part.
FAQ
What does E10 error code mean on a Frigidaire dishwasher?
Water fill timeout.
How do I reset Frigidaire dishwasher E10?
Unplug the dishwasher or switch it off at the breaker for 5 minutes, then restore power and restart. A reset clears a stored E10 after a glitch, but the code will return if the underlying fault is still present.
What part do I need for Frigidaire E10?
Often yes — error E10 frequently points to a failed component. Check the recommended parts below for direct replacements.
Can I fix Frigidaire error E10 myself?
Many E10 errors can be fixed DIY if you're comfortable with basic tools. Start with the reset and steps above. If the issue involves electrical components or the code returns after replacing parts, call a professional.
Frigidaire E10 on specific models
Other Frigidaire Dishwasher codes
Prevent this problem next time
- Keep the water supply valve fully open
- Do not pinch the inlet hose during installation
Sources
Manufacturer meaning
Water fill timeout.
FixApplianceCode guidance
Open the supply valve and check the inlet hose before replacing the water inlet valve.
Source type: Part database
Source: ModelPartFinder + FixApplianceCode editorial
Last reviewed: 2026-09-21
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FixApplianceCode may earn a commission when you purchase through qualifying links, at no additional cost to you. Affiliate disclosure