Kenmore Dishwasher F8E4 error code
Dishwasher
Kenmore dishwasher error code F8E4 means: Water detected in the drip tray — empty the tray and check for leaks. This guide covers how to reset the code, the most common causes, step-by-step troubleshooting, and replacement parts that typically resolve F8E4.
Safe to keep using?
Stop using
No immediate safety hazard detected, but monitor during use.
- • Unplug the appliance before inspection.
- • Turn off the water supply before disconnecting hoses.
- • Do not continue using the appliance until the cause is identified.
2 product recalls may apply
Brand-level matches — verify your model.
Show
2 product recalls may apply
Brand-level matches — verify your model.
Likely causes
Many codes resolve with cleaning, resetting, or reconnecting.
Check: Power-cycle the appliance and check for obvious blockages or loose connections.
Est. cost: $0–$0
Wear or electrical failure of an internal part.
Check: If basic checks fail, the faulty component likely needs replacement.
Est. cost: $0–$75
What it means
Water detected in the drip tray — empty the tray and check for leaks.
How to fix it
- Unplug the dishwasher or turn off power at the breaker before inspecting any components.
- Reset Kenmore F8E4: leave power off for 5 minutes, restore power, then restart. Confirm whether F8E4 returns.
- Check the most common cause for F8E4: Water detected in the drip tray — empty the tray and check for leaks.
- Inspect hoses, connections, and visible wiring for damage, clogs, or loose fittings.
- If a reset and basic checks don't clear the code, use our lookup tool for AI-powered diagnosis or contact a qualified technician.
- Reassemble, restore power, and run a test cycle. If F8E4 returns, the faulty component likely needs replacement.
Call a pro when: Call a technician if you smell burning, see sparking, hear grinding from the motor, or the code returns after replacing the suspected part.
FAQ
What does F8E4 error code mean on a Kenmore dishwasher?
Water detected in the drip tray — empty the tray and check for leaks.
What does Kenmore F8E4 mean?
Water detected in the drip tray — empty the tray and check for leaks.
How do I reset Kenmore dishwasher F8E4?
Unplug the dishwasher or switch it off at the breaker for 5 minutes, then restore power and restart. A reset clears a stored F8E4 after a glitch, but the code will return if the underlying fault is still present.
What part do I need for Kenmore F8E4?
Not always — some F8E4 errors are caused by user-fixable issues like clogs or unbalanced loads. Try the troubleshooting steps first.
Can I fix Kenmore error F8E4 myself?
Many F8E4 errors can be fixed DIY if you're comfortable with basic tools. Start with the reset and steps above. If the issue involves electrical components or the code returns after replacing parts, call a professional.
Do I need a replacement part for F8E4?
Not always — some F8E4 errors are caused by user-fixable issues like clogs or unbalanced loads. Try the troubleshooting steps first.
Other Kenmore Dishwasher codes
Prevent this problem next time
- Follow manufacturer maintenance schedule
- Address small issues before they worsen
Sources
Manufacturer meaning
Water detected in the drip tray — empty the tray and check for leaks.
FixApplianceCode guidance
Start with basic checks for Kenmore F8E4 before ordering parts.
Source type: Part database
Source: ModelPartFinder + FixApplianceCode editorial
Last reviewed: 2026-08-24
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FixApplianceCode may earn a commission when you purchase through qualifying links, at no additional cost to you. Affiliate disclosure