NIT8060UC DEMOC error
Your Bosch NIT8060UC is showing DEMOC. Before replacing parts, confirm the model tag matches NIT8060UC: Rating plate on the underside of the cooktop or in the installation manual packet. Demo mode (dE) disables heating — reset breaker then exit demo before assuming a zone failure. On this Bosch cooktop, DEMOC means Demo mode is on (shown as dE) — zones will not heat. Reset the breaker, then touch a control. The steps below follow the field-service order for the NIT8060UC platform — not the generic Bosch DEMOC page. Cross-check part fit with NIT8060UC before ordering — use the model-specific parts diagram. If the code cleared after a reset but returned mid-cycle, treat that as a confirmed fault rather than a one-time glitch.
Fix steps
- Verify the model tag reads NIT8060UC — Rating plate on the underside of the cooktop or in the installation manual packet.
- Reset DEMOC: unplug the cooktop or switch off the breaker for 5 minutes, then restore power.
- Inspect hoses, connections, and visible wiring for damage, clogs, or loose fittings related to DEMOC.
- Model note for NIT8060UC: Demo mode (dE) disables heating — reset breaker then exit demo before assuming a zone failure.
- Run a test cycle after repair. If the code returns, use the compatible parts below or the full brand code guide.
Guided repair checklist
Complete the safe checks one at a time. Progress is saved for this browser so you can continue later.
0 of 5 checks recorded
Recommended next action
Start with this check before considering replacement parts.
Check 1 of 5
Verify the model tag reads NIT8060UC — Rating plate on the underside of the cooktop or in the installation manual packet.
Did the repair resolve the issue?
Restoring repair progress…
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FAQ
What does DEMOC mean on a Bosch NIT8060UC?
Demo mode is on (shown as dE) — zones will not heat. Reset the breaker, then touch a control.
How do I reset DEMOC on a NIT8060UC?
Unplug the cooktop or switch it off at the breaker for 5 minutes, then restore power and restart. If DEMOC returns on the NIT8060UC, the underlying fault is still present.
What part do I need for NIT8060UC DEMOC?
Try the reset and troubleshooting steps first. DEMOC on the NIT8060UC is not always a failed part.
Is DEMOC on the NIT8060UC easy to fix?
Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.