GFW550SSNWW PF error
Your GE GFW550SSNWW is showing PF. Before replacing parts, confirm the model tag matches GFW550SSNWW: Open the door and check the rim or door frame; the silver sticker is also on the rear panel near the top. On this GE washer, PF means Power failure — cycle interrupted. The steps below follow the field-service order for the GFW550SSNWW platform — not the generic GE PF page. Cross-check part fit with GFW550SSNWW before ordering — use the model-specific parts diagram. If the code cleared after a reset but returned mid-cycle, treat that as a confirmed fault rather than a one-time glitch.
Fix steps
- Verify the model tag reads GFW550SSNWW — Open the door and check the rim or door frame; the silver sticker is also on the rear panel near the top.
- Reset PF: unplug the washer or switch off the breaker for 5 minutes, then restore power.
- Check inlet hoses, drain hose routing, and the door seal for obstructions or leaks before assuming an internal component failed for PF.
- Cross-check part fit with GFW550SSNWW before ordering — use the model-specific parts diagram.
- Run a test cycle after repair. If the code returns, use the compatible parts below or the full brand code guide.
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FAQ
What does PF mean on a GE GFW550SSNWW?
Power failure — cycle interrupted.
How do I reset PF on a GFW550SSNWW?
Unplug the washer or switch it off at the breaker for 5 minutes, then restore power and restart. If PF returns on the GFW550SSNWW, the underlying fault is still present.
What part do I need for GFW550SSNWW PF?
Try the reset and troubleshooting steps first. PF on the GFW550SSNWW is not always a failed part.
Is PF on the GFW550SSNWW easy to fix?
Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.