GE washer PF error code
Washer
Reviewed August 2025 · sources below
GE washer PF indicates the control detected a power loss — common after storms or breaker trips. On GTW465ASN models, PF is usually cleared by pressing Start once power is restored. If PF appears on every cycle without an outage, check the outlet and power cord connection at the back of the washer.
Safe to keep using?
No safety issue
This is a status or lock code, not a hardware fault.
5 product recalls may apply
Brand-level matches — verify your model.
Show
5 product recalls may apply
Brand-level matches — verify your model.
- Notice
Generac Power Systems Expands Recall of Generac and DR Power Electric Start Pressure Washers Due to Risk of Serious Injury or Death from Carbon Monoxide Hazard; Includes Additional Models
May 2026 · Confirm your model
- Notice
Generac Power Systems Recalls Generac and DR Power Electric Start Pressure Washers Due to Carbon Monoxide Hazard
Apr 2022 · Confirm your model
- Notice
Sargent Art Recalls Craft Paints Due to Risk of Exposure to Bacteria
Oct 2016 · Confirm your model
- Notice
GE Appliances Recalls Top-Loading Clothes Washers Due to Fire Hazard
Sep 2016 · Confirm your model
- Notice
Viking Range Expands Dishwasher Recall Due to Fire Hazard
Aug 2015 · Confirm your model
Likely causes
A brief outage or unplugging the washer stores PF.
Check: Press Power or Start/Pause to clear PF, then restart the cycle.
Est. cost: $0–$0
A loose plug or half-tripped breaker can interrupt power mid-cycle and store the status.
Check: Reseat the cord, reset the breaker fully off then on, and avoid extension cords.
Est. cost: $0–$0
What it means
Power failure — cycle interrupted.
How to fix it
- Confirm the washer breaker is ON and the outlet has power.
- Press Start to clear PF — the code is informational after a real outage.
- If PF returns every cycle, unplug and inspect the power cord at the terminal block.
- Test the outlet voltage — low voltage can cause repeated PF storage.
- Replace the cord only if pins are burned or the plug is loose.
Call a pro when: Call a technician if PF persists after cord replacement or you smell burning at the outlet.
FAQ
What does PF mean on GE washer?
PF is power failure — the control stored a power interruption event.
How do I reset GE PF?
Press Start after power is restored. No drain or spin is required.
Is PF dangerous?
No — it is informational. Fix power supply if it returns without outages.
Do I need a board for GE PF?
Uncommon — check cord and outlet before replacing the control.
GE PF on specific models
Other GE Washer codes
Prevent this problem next time
- Use a surge protector
- Avoid switching the washer off mid-cycle
Sources
Manufacturer meaning
Power failure — the last cycle was interrupted by a power loss.
FixApplianceCode guidance
Clear PF and restart the cycle. This is not a failed part.
Source type: Manufacturer
Source: GE washer support
Last reviewed: 2026-08-23
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FixApplianceCode may earn a commission when you purchase through qualifying links, at no additional cost to you. Affiliate disclosure