25370313211 F8EC error
Your Kenmore 25370313211 is showing F8EC. Before replacing parts, confirm the model tag matches 25370313211: Inside the fridge on the upper-left wall, or on the ceiling of the fresh-food section. On this Kenmore refrigerator, F8EC means Ice or water system fault — the ice maker or water valve circuit did not complete. The steps below follow the field-service order for the 25370313211 platform — not the generic Kenmore F8EC page. Parts listed below are confirmed compatible with 25370313211. If the code cleared after a reset but returned mid-cycle, treat that as a confirmed fault rather than a one-time glitch.
Buy the replacement part
MPN: W10884390
$79.99
Fix steps
- Verify the model tag reads 25370313211 — Inside the fridge on the upper-left wall, or on the ceiling of the fresh-food section.
- Reset F8EC: unplug the refrigerator or switch off the breaker for 5 minutes, then restore power.
- Inspect door gaskets, condenser coils, and listen for the evaporator fan when the compressor runs — heavy frost on the freezer back wall points to defrost failure before ordering a fan motor for F8EC.
- Parts listed below are confirmed compatible with 25370313211.
- Run a test cycle after repair. If the code returns, use the compatible parts below or the full brand code guide.
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FAQ
What does F8EC mean on a Kenmore 25370313211?
Ice or water system fault — the ice maker or water valve circuit did not complete.
How do I reset F8EC on a 25370313211?
Unplug the refrigerator or switch it off at the breaker for 5 minutes, then restore power and restart. If F8EC returns on the 25370313211, the underlying fault is still present.
What part do I need for 25370313211 F8EC?
Start with the 25370313211-compatible parts listed below. F8EC often points to a failed component on this Kenmore refrigerator.
Is F8EC on the 25370313211 easy to fix?
Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.